SNMP in RHEL 5 - service stop automaticly

[Marc Wiatrowski]

On Fri, 2008-07-04 at 12:36 +0100, Patrick_Fischer at dell.com wrote:

> Hi List,
> 
> i have a default installed RHEL 5 without service pack.
> 
> In the default Installation no SNMP rpm’s were installed.
> 
> Rhel 5 runs in a Virtual Machine on a PE 6800.
> 
> Now I install additionally:
> 
> lm_sensors-2.10.0-3-1.i386.rpm
> 
> net-snmp-5-3-1-24.el5.i386.rpm
> 
> net-snmp-utils-5-3-1-24.el5.i386.rpm
> 
> Now I start the service with:
> 
> Etc/init.d/snmpd start => ok
> 
> Now
> 
> Etc/init.d/snmpd status => snmpd dead but pid file exists (I delete
> the pid file and try it again => the same)


I'm assuming you installed net-snmp-libs as well.

If you have 5.0 installed, why are you using lm_sensors and net-snmp
from update 2?

Look at /etc/snmp/snmpd.options and turn on some debugging.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20080704/bcd292a0/attachment.htm