drac 4 firmware fail.

[Paul Dekkers]

L.P.H. van Belle wrote:
> Hi, 
>
> Is there nobody who can give me a hint how to fix this.
> I checked in the DRAC bios and thats ok. ( still 1.5 ) 
>
> i really need some help please... 
>   

I once fried DRAC firmware, the update failed for some reason. (I guess
the lesson I learned was "don't upgrade your firmware from ESX" or so.)
Anyway: I fixed it, just by running the upgrade (or - I think you can
actually downgrade) again (but then under a temporary RedHat install,
that was easiest at that moment).

It was a different adapter though, maybe even a Perc 5/i... but did you
try that? Apparently the upgrade failed, as your BIOS is still on its
previous level...

Regards,
Paul

>> -----Oorspronkelijk bericht-----
>> Van: linux-poweredge-bounces at dell.com 
>> [mailto:linux-poweredge-bounces at dell.com] Namens L.P.H. van Belle
>> Verzonden: donderdag 17 januari 2008 8:54
>> Aan: linux-poweredge at dell.com
>> Onderwerp: drac 4 firmware fail.
>>
>> Hi, 
>>
>> When trying to get to my drac 4 controller, i get this message.
>>
>> Error: 30001
>> Method httpCgiErrorPage()
>>
>>
>>
>> How can i fix this, it happend after trying to upgrade the 
>> firmware from 1.5 to 1.6 ( Drac 4/P )
>>
>> Louis
>>
>>
>>     
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>