omreport on PV220S

[Harald_Jensas at Dell.com]

Hi,

Try doing a $ cat /proc/scsi/scsi

The PV220S will show up as a device and the Firmware Revision should be shown:

Example output:

--- < > ---
Host: scsi1 Channel: 05 Id: 06 Lun: 00
  Vendor: DELL     Model: PV22XS           Rev: E.16
  Type:   Processor                        ANSI SCSI revision: 03
--- < > ---


Regards
Harald Jensås


> -----Original Message-----
> From: linux-poweredge-bounces at dell.com [mailto:linux-poweredge-
> bounces at dell.com] On Behalf Of Einar Næss Jensen
> Sent: 13 February 2008 10:06
> To: linux-poweredge-Lists
> Subject: omreport on PV220S
> 
> I've recently experienced a lot of failed drives on a PV220S connected
> to a PE1950. I've updated all bios and firmware.
> It is running Debian etch.
> 
> When I try to update the firmware on the PV220S it reports that the
> firmware is already E19, but when checking with omreport, it says
> firmware is E17.
> 
> What should I assume is correct? And how do I resolve this?
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq