LSI MegaCli and SAS6/iR in PowerEdge R200

[Patrick_Boyd at Dell.com]

My recommendation? OMSA it works for PERC 3/4/5/6, CERC, and SAS 5/6. No
other tool does that.

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Matthias Saou
Sent: Friday, February 01, 2008 9:39 AM
To: linux-poweredge-Lists
Subject: Re: LSI MegaCli and SAS6/iR in PowerEdge R200

Patrick_Boyd at dell.com wrote :

> MegaCLI doesn't support the SAS iR controllers.

What is the right command line tool for those, then? My Dell sales guy
managed to convince me that for a simple 2 disk RAID-1 in some PE1950
III, I would be fine using the SAS 6/iR instead of choosing a PERC...
but for the RAID status monitoring, I need to find the right tool and
create yet another script for the monitoring tool I use :-(

Matthias

-- 
Clean custom Red Hat Linux rpm packages : http://freshrpms.net/
Fedora release 8 (Werewolf) - Linux kernel 2.6.23.14-107.fc8
Load : 0.38 0.31 0.18

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq