LSI MegaCli and SAS6/iR in PowerEdge R200

[Patrick_Boyd at Dell.com]

MegaCLI doesn't support the SAS iR controllers.

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Moritz Mertinkat
Sent: Friday, February 01, 2008 7:58 AM
To: linux-poweredge-Lists
Subject: Re: LSI MegaCli and SAS6/iR in PowerEdge R200

Hi,

> I tried using the MegaCLI 1.01.39 downloaded from
>
http://www.lsi.com/support/downloads/megaraid/miscellaneous/linux/1.01.3
9_Linux_Cli.zip

You might want to try version 1.01.40:
http://www.lsi.com/support/downloads/megaraid/miscellaneous/linux/1.01.4
0_Linux_Cli.zip

> to manage the RAID1 on a SAS6/iR in a PowerEdge R200, but it doesn't
> seem to recognize/support the controller:

What is the output of
# lspci |grep RAID
and
# lspci -n

If you're using an AMD64 capable CPU try MegaCli64.

Regards,
Moritz

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq