RAID monitoring tools for Dell 1950

[Nicholas Dronen]

On Wed, Dec 24, 2008 at 10:18 AM, Brian A. Seklecki
<bseklecki at collaborativefusion.com> wrote:
>
>> I've seen LSI's megarc mentioned elsewhere, but I haven't found it on
>> lsi.com yet.  Any idea where I can find it or something similar for
>
> No you need MegaCli.  Binaries from a friends and partners in crime at
> LSI/AMI/QLogic.

Thanks.  MegaCli works for two out of the three of my 1950's.  The
third one is a slightly different device, and MegaCli doesn't work on
it.   'MegaCli -CfgDsply -aALL', for instance, generates no output at
all on that machine.  Here's the lspci output.  Is there a different
package for this controller?

    05:00.0 SCSI storage controller: LSI Logic / Symbios Logic
SAS1068E PCI-Express Fusion-MPT SAS (rev 08)
            Subsystem: Dell SAS 6/iR Adapter RAID Controller
            Flags: bus master, fast devsel, latency 0, IRQ 169
            I/O ports at ec00 [size=256]
            Memory at dfbec000 (64-bit, non-prefetchable) [size=16K]
            Memory at dfbf0000 (64-bit, non-prefetchable) [size=64K]
            Expansion ROM at dfa00000 [disabled] [size=1M]
            Capabilities: [50] Power Management version 2
            Capabilities: [68] Express Endpoint IRQ 0
            Capabilities: [98] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
            Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
            Capabilities: [100] Advanced Error Reporting

Regards,

Nick