Fedora Core 10 - PowerEdge 1950 III

[Tim Richter]

Hello.

 

I am attempting to install Fedora Core 10 on a new Dell PowerEdge 1950
III with embedded Perc 6/I Raid 1.  The installation process works
great.  The installation program recognizes the Dell Per 6/1 Raid,
creates its partitions, and formats with no problem.  The installation
proceeds installing Fedora, and then it reboots.

 

Upon reboot, I get the following:

 

Reading all physical volumes.  This may take a while...

Volume group "VolGroup00" not found

Unable to access resume device (/dev/VolGroup00/LogVol01)

Mount: error mounting /dev/root on /sysroot as ext3: No such file or
directory

Scsi 2:0:32:0: Enclosure DP BACKPLANE 1.05 PQ: 0 ANSI: 5

Scsi: 2:2:0:0: Direct-Access DELL PERC 6/I 1.21 PQ: 0 ANSI: 5

Scsi 2:0:32:0: Attached scsi generic sg1 type 13

Sd 2:2:0:0: [sda] 285474816 512-byte hardware sectors (146163 MB)

Sd 2:2:0:0: [sda] Write Protect is off

Sd 2:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports
DPO and FUA

Sd 2:2:0:0: [sda] 285474816 512-byte hardware sectors (146163 MB)

Sd 2:2:0:0: [sda] Write Protect is off

Sd 2:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports
DPO and FUA

      Sda: dsa1 dsa2

Sd 2:2:0:0: [sda] Attached SCSI disk

Sd 2:2:0:0: Attached scsi generic sg2 type 0

 

 

Fedora never loads.  I have tried reinstalling, but the same results
accurred.  If anyone has advice to offer, I would appreciate it.

 

Thank you,

 

Tim

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20081218/034ed01a/attachment-0001.htm