DRAC-ERA/0 login issue

[Ryan Bair]

I'm not sure if you're clear on this point or not, but the DRAC is
completely separate from the OS and has its own username and passwords
which need to be initially set by entering the config utility on boot.

On Sun, Dec 14, 2008 at 4:36 PM, quaqu at mytweakers.net
<quaqu at mytweakers.net> wrote:
> Dear all,
>
> I have a poweredge 1750 with a drac or era/0 card, but I can't log in!
> The card is not the PCI version. I found the switch SW2 and it resets
> the number of log-in attempts. But after a reset, logging in with
> root/calvin does not work. Not with the webGUI, which works fine, or
> telnet.
> Using telnet, the response is:
> "Dell Embedded Remote Access Controller (ERA/O)
> Firmware Version 3.12 (Build 04.26)"
> As OS, I installed openSUSE 11.0 with not much more than std LAMP. Do
> I need to address this from the OS or something else? At this moment I
> have physical access, so I can push buttons etc. Does anyone have any
> idea how I can log in to the card and control my server?
>
> With kind regards,
>
> Willem
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>