Paritioning md3000i?

[Kristian_Dybvik at Dell.com]

Have you configured the iscsi initiator? In order to get your arrays
from md3000i up and running on your server, you need to install and
properly configure iscsi initiator
Heres a howto i found explaining how to configure iscsi initiator, maybe
it will come in handy:
http://www.cyberciti.biz/tips/rhel-centos-fedora-linux-iscsi-howto.html 

Please note i'm not sending this information as a Dell representative.

_
kind regards
Kristian Dybvik

*** Please include all history when replying ***

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Scott R. Ehrlich
Sent: den 19 augusti 2008 18:28
To: linux-poweredge-Lists
Subject: Paritioning md3000i?

I have a shiny, new, md3000i connected to a PE2950 running CentOS 5.0 
out-of-box.   I've successfully used the gui md3000i app to create 
partitions and enable snapshots.   The real fun task, I've learned, is
to 
figure out how to get Linux to see the new logical RAID volumes on the 
3000i so I can partition them.  fdisk -l doesn't see them, and dmesg
shows 
some hints, but nothing specific.  I rebooted the 2950 for hopeful LUN 
counting, but nothing helped.

What am I missing?

Thanks.

Scott

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq