install debian etch on dell poweredge SC1435

[L.P.H. van Belle]

remember, SAS 6i/R has bas performance.

Always buy PERC controllers like Perc 5/i or Perc 6/i

Louis
 

>-----Oorspronkelijk bericht-----
>Van: linux-poweredge-bounces at dell.com 
>[mailto:linux-poweredge-bounces at dell.com] Namens Patrick_Boyd at dell.com
>Verzonden: woensdag 6 augustus 2008 16:29
>Aan: buzonete at gmail.com; linux-poweredge at lists.us.dell.com
>Onderwerp: RE: install debian etch on dell poweredge SC1435
>
>I can't speak explicitly for this Debian release, but the drivers for
>these RAID cards have been in the mainline kernel for some time.
>
>-----Original Message-----
>From: linux-poweredge-bounces at dell.com
>[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Dani
>Sent: Wednesday, August 06, 2008 6:52 AM
>To: linux-poweredge-Lists
>Subject: install debian etch on dell poweredge SC1435
>
>Hi,
>
>I'm thinking on buy a dell SC1435 server with two hard disk to 
>configure
>RAID 1. In the Dell's site I've seen I need a integrated controller SAS
>5/i for Sata and SAS hard disk's and a C5-Add-in SAS RAID1, with a
>SAS5iR controller. I don't know much about raid and I'm afraid 
>of having
>problems installing Debian Etch on this server. Have anybody installed
>any Debian distro on a SC1435 with this configuration?? What 
>is de image
>I must to download? am64? (the processor I want to get is Quad Core AMD
>Opteron 2350.
>
>Thanx
>
>_______________________________________________
>Linux-PowerEdge mailing list
>Linux-PowerEdge at dell.com
>http://lists.us.dell.com/mailman/listinfo/linux-poweredge
>Please read the FAQ at http://lists.us.dell.com/faq
>
>_______________________________________________
>Linux-PowerEdge mailing list
>Linux-PowerEdge at dell.com
>http://lists.us.dell.com/mailman/listinfo/linux-poweredge
>Please read the FAQ at http://lists.us.dell.com/faq
>