PE1850 PERC 4e/Si Debian OMSA

[linux-poweredge at ml.epigenomics.com]

Hi!

After upgrading the kernel on a PE1850 running Debian etch to 2.6.25.14
OMSA does not recognize the PERC 4e/Si RAID controller any more.

The controller and the attached disks run fine with the megaraid_mbox
kernel module. It's just that OMSA does not show them.

With the previous kernel (2.6.24.2) everything was fine. Any hints?

Greetings
-- 
Robert Sander