Brand new 2950 Won't Boot

[Sturgis, Grant]

Sturgis, Grant wrote:
> Tino Schwarze wrote:
>  > On Tue, Apr 22, 2008 at 10:18:03AM -0600, Sturgis, Grant wrote:
>  >
>  >  > Just got a shiny new 2950 and installed RHEL 2.6.  Rebooted from the
>  >  > installation program and the system will not boot.  I choose F11 
> to get
>  >  > to the boot menu, choose "Hard drive C:" and nothing happens.  If I do
>  >  > not choose F11 (just let the system boot as normal), it gets to the
>  >  > "Press <Ctrl-E> for Remote Access Setup within 5 sec....", then just
>  > hangs.
>  >  >
>  >  > Anyone know what is happening here and how to fix it?
>  >
>  > Sounds like the boot loader didn't get installed correctly. Try booting
>  > some rescue system and reinstall grub or lilo.
>  >
>  > Tino.
> 
> Sounds reasonable.  So I boot to rescue mode, fdisk -l looks fine.  So I
> do a chroot /mnt/sysimage and then:
> 
> grub-install /dev/sda
> 
> (this is one big RAID 5 array)
> 
> The error I get is:
> 
> The file /boot/grub/stage1 not read correctly
> 
> Now what?

Look what I found:

grub> cat (hd0,0)/boot/grub/grub.conf

Error 18: Selected cylinder exceeds maximum supported by BIOS

hmm...

So I have 6x500GB disks in RAID 5.  Is that too big?


This electronic message transmission is a PRIVATE communication which
contains information which may be confidential or privileged. The
information is intended to be for the use of the individual or entity
named above. If you are not the intended recipient, please be aware that
any disclosure, copying, distribution or use of the contents of this
information is prohibited. Please notify the sender  of the delivery
error by replying to this message, or notify us by telephone
(877-633-2436, ext. 0), and then delete it from your system.