RAID 1+0 on PERC 3/Di

[Kipp, Jim]

Thanks for the help. I will give it a try in OMSA

> -----Original Message-----
> From: Patrick_Boyd at Dell.com [mailto:Patrick_Boyd at Dell.com]
> Sent: Tuesday, April 08, 2008 4:25 PM
> To: Kipp, Jim; linux-poweredge at lists.us.dell.com
> Subject: RE: RAID 1+0 on PERC 3/Di
> 
> You probably can, I'm just not sure how of the top of my head.
> 
> -----Original Message-----
> From: Kipp, Jim [mailto:jkipp at ingdirect.com]
> Sent: Tuesday, April 08, 2008 3:09 PM
> To: Boyd, Patrick; linux-poweredge-Lists
> Subject: RE: RAID 1+0 on PERC 3/Di
> 
> Thank you. I can't do it from the RAID config util on boot up?
> 
> 
> > -----Original Message-----
> > From: Patrick_Boyd at Dell.com [mailto:Patrick_Boyd at Dell.com]
> > Sent: Tuesday, April 08, 2008 1:48 PM
> > To: Kipp, Jim; linux-poweredge at lists.us.dell.com
> > Subject: RE: RAID 1+0 on PERC 3/Di
> >
> > The PERC 3/Di does allow for a RAID 10 which is what you described
(a
> > stripe over mirror sets). The easiest way to do this would be to use
> > OMSA or the CDU utility.
> >
> > -----Original Message-----
> > From: linux-poweredge-bounces at dell.com
> > [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Kipp, Jim
> > Sent: Tuesday, April 08, 2008 12:43 PM
> > To: linux-poweredge-Lists
> > Subject: RAID 1+0 on PERC 3/Di
> >
> >
> > Is it possible to set up a RAID 1+0 on a PE 2650 with a PERC 3/Di
> card?
> > Sorry, I don't have much experience with Dell hardware. The server
has
> 4
> > equal sized drives. So I would be looking to stripe the 2 mirror
sets.
> >
> 
> 
> 
> 
> 
>
************************************************************************
> *****
> This email may contain confidential or privileged information. If you
> believe
>  you have received the message in error, please notify the sender and
> delete
> the message without copying or disclosing it.
>
************************************************************************
> *****