RAID 1+0 on PERC 3/Di

[Kipp, Jim]

Thank you. I can't do it from the RAID config util on boot up?


> -----Original Message-----
> From: Patrick_Boyd at Dell.com [mailto:Patrick_Boyd at Dell.com]
> Sent: Tuesday, April 08, 2008 1:48 PM
> To: Kipp, Jim; linux-poweredge at lists.us.dell.com
> Subject: RE: RAID 1+0 on PERC 3/Di
> 
> The PERC 3/Di does allow for a RAID 10 which is what you described (a
> stripe over mirror sets). The easiest way to do this would be to use
> OMSA or the CDU utility.
> 
> -----Original Message-----
> From: linux-poweredge-bounces at dell.com
> [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Kipp, Jim
> Sent: Tuesday, April 08, 2008 12:43 PM
> To: linux-poweredge-Lists
> Subject: RAID 1+0 on PERC 3/Di
> 
> 
> Is it possible to set up a RAID 1+0 on a PE 2650 with a PERC 3/Di
card?
> Sorry, I don't have much experience with Dell hardware. The server has
4
> equal sized drives. So I would be looking to stripe the 2 mirror sets.
> 





*****************************************************************************
This email may contain confidential or privileged information. If you believe
 you have received the message in error, please notify the sender and delete 
the message without copying or disclosing it.
*****************************************************************************