Can't reset foreign drive in Open Manage

[Michael_E_Brown at Dell.com]

Nice. I'm glad they added this, as the last version I checked didnt have these options. (admittedly, the last time I checked this particular feature was OMSA 4.x)
--
Michael

-----Original Message-----
From: linux-poweredge-bounces at dell.com on behalf of Patrick_Boyd at dell.com
Sent: Wed 9/19/2007 2:23 PM
To: ken_wahl at berkeley.edu; linux-poweredge-Lists
Subject: RE: Can't reset foreign drive in Open Manage
 
"Clear Foreign Configuration" or Import are options under the
controller. They aren't on the Physical Disk page.

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Ken Wahl
Sent: Wednesday, September 19, 2007 12:55 PM
To: linux-poweredge-Lists
Subject: Can't reset foreign drive in Open Manage

Does anyone know how to reset a SAS drive labeled as "foreign" if the  
option isn't appearing in the Open Manage GUI?  All I'm getting are  
"blink" options in the pulldown menu -- nothing else.

The only way the disk is identified is by the PERC 5/i controller and  
bay number:  ID 1:0:7.  It's not appearing in RedHat 4 as /dev/sdb.

Diagnostics  shows there's nothing wrong with the drive or  
controller.  I just can't regain access to it.

Thanks,

Ken

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq