Antwort: RE: Just wanted to say "hi!"

Wed Sep 19 09:27:23 CDT 2007

On that client we are using Zabbix Agent 1.1.3 with Server 1.4.1.
Other clients from V1.0.9 up to 1.4.1 are also monitored.

MfG,
---------------------------------------------------------------------------

Heiner Wulfhorst

Intermoves AG
Technologiepark 19
33100 Paderborn

* Tel.  + 49 (0) 52 51 16 13-0
* Fax  + 49 (0) 52 51 16 13-99
* mailto:heiner.wulfhorst at intermoves.de

Vorstand: Volker Herold
Aufsichtsratvorsitzender: Prof. Dr. Uwe Kern
Sitz der Gesellschaft: Paderborn
Registergericht: Paderborn, HRB 3592

"Johan Pretorius" <jpretorius at dunns.co.za> 
19.09.2007 16:17

An
<heiner.wulfhorst at intermoves.de>
Kopie

Thema
RE: Just wanted to say "hi!"

This is excellent news! I'm also using zabbix and I wanted to do this for 
a long time, but only started investigating on installing the Dell tools 
on Fedora now.

What version of Zabbix are you using?

Johan Pretorius

From: linux-poweredge-bounces at dell.com 
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of 
heiner.wulfhorst at intermoves.de
Sent: 19 September 2007 13:37
To: linux-poweredge at dell.com
Subject: Just wanted to say "hi!"

Hello List, 

i just found this list when i searched for some information about 
monitoring Hardware via ipmitool and Zabbix (thanks, Bart van Kuik, for 
sharing your experiences ("Reading out IPMI sensor values with Zabbix")! 
We use many Dell PE850 and 860 servers with Fedora Core 4, 5 and 6 and are 
quite pleased with them. 

I'm starting to monitor them as follows: 

on Client console: 
[root at cvs-server ~]# ipmitool sdr list full 
Temp             | 40 degrees C      | ok 
Planar Temp      | 26 degrees C      | ok 
CMOS Battery     | 3.08 Volts        | ok 
PROC Fan         | 3075 RPM          | ok 
DIMM Fan         | 3075 RPM          | ok 
PCI Fan          | 1350 RPM          | ok 

My UserParameters in zabbix agentd.conf: 
UserParameter=sensors.temp.cpu,sudo ipmitool sdr|grep "^Temp"|awk '{print 
$3}' 
UserParameter=sensors.temp.planar,sudo ipmitool sdr|grep "Planar Temp"|awk 
'{print $4}' 
UserParameter=sensors.fan.cpu,sudo ipmitool sdr|grep "PROC Fan"|awk 
'{print $4}' 
UserParameter=sensors.fan.ram,sudo ipmitool sdr|grep "DIMM Fan"|awk 
'{print $4}' 
UserParameter=sensors.fan.pci,sudo ipmitool sdr|grep "PCI Fan"|awk '{print 
$4}' 
UserParameter=ipmitool[*],sudo ipmitool sdr|grep $1|awk '{print $2}' 

and on client console again: 
zabbix_agentd -t sensors.temp.cpu 
zabbix_agentd -t sensors.temp.planar 
zabbix_agentd -t sensors.fan.cpu 
zabbix_agentd -t sensors.fan.ram 
zabbix_agentd -t sensors.fan.pci 
e.g.:        zabbix_agentd -t ipmitool['"Planar Temp"','$4'] 

Best regards, 

---------------------------------------------------------------------------

Heiner Wulfhorst

Intermoves AG
Technologiepark 19
33100 Paderborn

* Tel.  + 49 (0) 52 51 16 13-0
* Fax  + 49 (0) 52 51 16 13-99
* mailto:heiner.wulfhorst at intermoves.de

Vorstand: Volker Herold
Aufsichtsratvorsitzender: Prof. Dr. Uwe Kern
Sitz der Gesellschaft: Paderborn
Registergericht: Paderborn, HRB 3592

____________________________________________________________________________
This communication and any attachments are confidential and intended for 
the sole use of the
intended recipient.  Any form of copying or disclosure of this 
communication to any third parties
without permission is prohibited.  The contents of this communication and 
its attachments are
not intended to be relied upon in law without subsequent written 
confirmation.  As such, Dunns
Stores (Pty) Ltd accept no responsibility or liability (including 
negligence) for the consequences
of anyone acting, or not acting, on information contained therein.

If you have received this communication in error please notify us 
immediately and destroy or
delete it.
____________________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20070919/21054ef3/attachment.htm 