Dell PE860 and Open Manager

[Frank Warnke]

Paul,

That is a good lead but it is different to the symptoms I had.
dsm_sa_datamgr32d was stopped while all the others were running for me.
My problem is caused by a Dell supplied e1000 updated driver RPM that
does not like something in my setup.

I found useful information in the archives that helped me rule out some
of the more common problems before I posted to this list.  You may also
get an idea of what information may be useful to include in you next e-
mail to this list if you still need help after searching the archives.

www.google.com or specifically Dell's lists with;
Search: <search terms> site:lists.us.dell.com

Dell linux-poweredge archives;
http://lists.us.dell.com/pipermail/linux-poweredge/


Two sites that have the linux-poweredge archives that can be searched
through;
  
http://dir.gmane.org/gmane.linux.hardware.dell.poweredge

http://marc.info/?l=linux-poweredge&r=1&w=2


Frank

On Tue, 2007-09-18 at 16:03 +0100, Paul Roberts wrote:
> Hi Frank,
> 
> It tells me the following is stopped: 
> 
> ipmi driver is stopped
> dsm_sa_datamgr32d is stopped
> dsm_sa_eventmgr32d is stopped
> 
> 
> Regards
> 
> Paul Roberts
> 
> 
> -----Original Message-----
> From: Frank Warnke [mailto:frank at newspapersystems.com] 
> Sent: 18 September 2007 14:36
> To: linux-poweredge at dell.com
> Cc: paul.roberts at 7digital.com
> Subject: Re: Dell PE860 and Open Manager
> 
> On Tue, 2007-09-18 at 08:09 -0500,Paul Roberts wrote:
> 
> > Hi,
> >  
> > I have a PE860 connected to a MD1000, running CentOS 4.4.
> > All is running well and as expected.
> >  
> > I have managed to install Open Manage 5.2, but one I login no 
> > information is displayed, just the titles of the screens
> >  
> > Any ideas as to why no information is displayed?
> >  
> > Regards
> > 
> > Paul Roberts
> 
> I am not an OMSA expert but I just had a similar problem and running this
> might give a clue;
>  
> /usr/bin/srvadmin-services.sh status
> 
> 
> Frank
> 
>