"No Task Available"

[Patrick_Boyd at Dell.com]

You can't run a consistency check because the SAS 5/iR does not support
one. OMSA will only monitor a SAS 5/iR it will not allow you to perform
any configuration.

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Adam C. Mathews
Sent: Thursday, September 13, 2007 6:02 AM
To: linux-poweredge-Lists
Subject: "No Task Available"

Relatively newbie Linux user here, please bear with me.

Have CentOS 5.0 x64 installed on a Poweredge 860.  Running a SAS 5/ir
RAID card, RAID1 created in the card's setup.  Using whichever
default/kernel driver CentOS chose for the card. (Could someone tell me
how to check the SAS driver?)

Installed OMSA 5.2.0 from the yum repository.  All seems fine, I can
login and check information.  However, when I navigate to the virtual
disk, the drop-down shows "No Task Available", so I cannot run a
consistency check.

Any thoughts on why?  Maybe because I don't have the SPECIFIC Dell
driver installed?

Here is some info from within OMSA if it helps...

Firmware Version
00.10.49.00.06.12.02.00
Driver Version
3.04.02



Thank you for your time.

ADAM


_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq