remote reconfig of DRAC5?

[Krishnaprasad_K at Dell.com]

Hi,

	You can use racadm command  line utility for changing properties
of DRAC5. You can use "racadm setniccfg -s <Ipaddress of DRAC> <Netmask>
<gateway>" for changing IP of DRAC

	You can use ipmitool ( which is open source tool ) for doing all
those things from CLI


Thanks, 
Krishnaprasad 

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of
Brian_Pickering at selinc.com
Sent: Wednesday, September 12, 2007 11:13 PM
To: u1_fd at dslr.net
Cc: linux-poweredge-Lists
Subject: Re: remote reconfig of DRAC5?

If you have the OMSA web interface installed, its under System > Main 
System Chassis > Remote Access, then the Configuration tab.  I'm pretty 
sure omconfig has access from the CLI, but I've never done it before.




From:
u1_fd at dslr.net
To:
linux-poweredge at dell.com
Date
09/12/2007 10:38 AM
Subject:
remote reconfig of DRAC5?



This is an RTFM type question - but .. if a server is up and working, is

there any way to reach the DRAC5 card from within the OS and at least 
modify the IP and gateway it is using, so I can then reach it directly 
.. or does that require a human, a keyboard, a console and a reboot?

thanks

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq