Munin plugin for OMSA

[Marcus Bointon]

On 10 Sep 2007, at 20:56, Jim Nelson wrote:

> I modified the sensors_ plugin for munin to work with omreport - it  
> works with
> the PE 750, 1750, and 1950's I have at hand, and I'm looking for  
> feedback before
> I submit it for inclusion.

Works nicely for me on some 1950s, but not on an 1850 ('munin-run  
omsa_fans suggest' returns nothing). Not sure why not, here's some  
sample output - can you see what's amiss?

#omreport chassis fans -fmt ssv
Fan Probes Information

Main System Chassis Fans : Ok

Fan Redundancy : Ok

Attribute;Value
Redundancy Status;Full

Probe List

Index;Status;Probe Name;Reading;Minimum Warning Threshold;Maximum  
Warning Threshold;Minimum Failure Threshold;Maximum Failure Threshold
0;Ok;BMC FAN 1A RPM;7500 RPM;[N/A];[N/A];2175 RPM;[N/A]
1;Ok;BMC FAN 1B RPM;5475 RPM;[N/A];[N/A];2175 RPM;[N/A]
2;Ok;BMC FAN 2A RPM;7800 RPM;[N/A];[N/A];2175 RPM;[N/A]
3;Ok;BMC FAN 2B RPM;5625 RPM;[N/A];[N/A];2175 RPM;[N/A]
4;Ok;BMC FAN 3A RPM;7800 RPM;[N/A];[N/A];2175 RPM;[N/A]
5;Ok;BMC FAN 3B RPM;5625 RPM;[N/A];[N/A];2175 RPM;[N/A]
6;Ok;BMC FAN 4A RPM;8025 RPM;[N/A];[N/A];2175 RPM;[N/A]
7;Ok;BMC FAN 4B RPM;5700 RPM;[N/A];[N/A];2175 RPM;[N/A]

#omreport chassis temps -fmt ssv
Temperature Probes Information

Main System Chassis Temperatures : Ok

Index;Status;Probe Name;Reading;Minimum Warning Threshold;Maximum  
Warning Threshold;Minimum Failure Threshold;Maximum Failure Threshold
0;Ok;PROC_1 Temp;37.0 C;[N/A];85.0 C;[N/A];90.0 C
1;Ok;PROC_2 Temp;37.0 C;[N/A];85.0 C;[N/A];90.0 C
2;Ok;BMC Ambient Temp;21.0 C;10.0 C;42.0 C;5.0 C;47.0 C
3;Ok;BMC Planar Temp;31.0 C;10.0 C;67.0 C;5.0 C;72.0 C
4;Ok;BMC Riser Temp;34.0 C;10.0 C;62.0 C;5.0 C;67.0 C

My 1850 doesn't report voltages - just says 'good'.

Marcus
-- 
Marcus Bointon
Synchromedia Limited: Creators of http://www.smartmessages.net/
UK resellers of info at hand CRM solutions
marcus at synchromedia.co.uk | http://www.synchromedia.co.uk/