Adding drives to a Powervalut 200s

[Patrick_Boyd at Dell.com]

You should be able to add the drives while the system is up however you
need to take one of the nodes down to create the new VD or reconfigure
an existing VD.

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Bill Dealey
Sent: Monday, September 10, 2007 1:02 PM
To: linux-poweredge-Lists
Subject: Adding drives to a Powervalut 200s

I have a PowerValut 220S running in clustered mode connected to two 
PowerEdge 1850 running RHEL 4.5 connected via a Perc 4e/DC card.  I have

some new disk drives that I need to add to the PowerVault. 
Can I add these drives while the system is running or do I need to power

down everything, add disk drives, and power up?

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq