ITAssistant not able to detect Fedora 7 (F7) box using SNMP and OMSA 5.2 installed

[John]

On Thu, 2007-09-06 at 21:15 +1000, Lee, John (Sydney) wrote:
> Hi all,
> 
> *** I just resent this in case it was overlooked due to the labour day
> holiday ***
> *** Guys, can anyone please help? ***
> 
> I am using Fedora 7 (F7) on DELL PowerEdge 860 with OMSA 5.2
> 
> Thanks to this mailing list, I have done all below.
> 
> 1.   wget http://linux.dell.com/repo/hardware/bootstrap.cgi
> 2.   Modify bootstrap.cgi
> 3.   ./bootstrap.cgi
> 4.   Modify /etc/yum/pluginconf.d/dellsysidplugin.conf
> 5.   getSystemId
> 6.   Modify /etc/yum.repos.d/dell-hw-specific-repository.repo
> 6a   ??? yum install net-snmp
> 7.   yum install srvadmin-all
> 8.   srvadmin-services.sh start
> 9.   Access https://Fedora7Box:1311 no problem
> 10.  Set ITAssistant server IP address and community name on
> https://Fedora7Box:1311 
> 
> However, my ITAssistant server was not able to detect the Fedora 7 Box.
> 
> It appears there must be something wrong with my SNMP set up.  
> Here is the result of # ps auxw | grep snmp
> root      3942  0.0  0.0  10256  1704 ?        Ss   11:58   0:00
> snmptrapd
> root      4785  0.5  0.1  48020  3076 ?        Ssl  13:20   0:24
> /opt/dell/srvadmin/dataeng/bin/dsm_sa_snmp32d
> root      4977  0.0  0.0   4008   708 pts/0    S+   14:30   0:00 grep
> snmp
> 
> I have got a few questions about SNMP setup for the LINUX box.

http://support.dell.com/support/edocs/software/svradmin/5.1/en/ug/html/setup.htm
http://support.dell.com/support/edocs/software/svradmin/5.2/en/ug/html/setup.htm


Check out that maybe that will get you going.

> 
> Q1.  Do I need to install/start net-snmp at all?
>      It appears I am duplicating snmp because net-snmp was not able to
> start/stop properly while dsm_sa_snmp32d is already started.
>      # service snmpd stop
>      Stopping snmpd:                                       [FAILED]
>      # service snmpd start
>      Starting snmpd:                                       [  OK  ]
>      # service snmpd status
>      snmpd dead but subsys locked
> Q2.  Do I need to install/start snmptrapd at all?
Assuming you want to monitor  it [ yes] "the snmp messages and errors" 
> 
> Q3.  I saw there are many articles on the Internet that mention about
> modifying snmpd.conf to change the community name in order to get DELL
> ITAssistant to detect the server.
>      Is this procedure really required since I have already set this up
> in DELL OMSA online?
> 
> Has anyone encountered this problem before?
> 
> Thanks.
> The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it.
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
-- 
~/john

OpenPGP Sig:BA91F079