Perc 5/i error message

[Patrick_Boyd at Dell.com]

There is an operation on the PERC 5's called Battery Learn. This is a
test and allows the controller to learn the high and low wattage marks
of the battery.

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Liam Kirsher
Sent: Wednesday, September 05, 2007 12:45 PM
To: linux-poweredge-Lists
Subject: Perc 5/i error message

Hi,

I am getting messages during boot regarding a bad battery, and the error
output keeps flashing
E1211 ROMB Battery
Which corresponds to:
RAID battery is either missing, bad, or unable to recharge due to
thermal issues.

I have replaced the battery with a new one from the distributor, but I
am still getting the same error message.

This forces the drives into write-through mode, which is not what I
want.

I think my next step will be to try to replace the entire board/battery.
Is there any more I could do to track down the problem?

I'd like to test the battery, but I'm not sure how to do that, either.

I believe the part number is YF437. However, when I look on eBay I find
other PERC 5/i's with other numbers.
Are they compatible?  For example, TU005, FT781.  What's the difference?

Liam



-- 
Liam Kirsher
PGP: http://liam.numenet.com/pgp/

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq