Dell Poweredge 1950 freezing

[Brian A. Seklecki]

There's an event log burried in the RAID HBA BIOS menus somewhere. ~BAS

On Wed, 2007-08-29 at 21:48 -0400, John wrote:
> If you have OMSA installed it will or should indicate the failing disk
> that is installed in the raid array. I would replace the bad disk with
> a new one. It should not keep trying to rebuild the array. Keep server
> booted while it builds.
> 
> 
> On Thu, 2007-08-30 at 09:52 +1000, Chmouel Boudjnah wrote: 
> > Hi,
> > 
> > Thanks for that, but do you have any idea why it keep trying to
> > rebuild the array ? Do you think any faulty disks ?
> > 
> > Cheers, Chmouel.
> > 
> > John <jses27 at gmail.com> writes:
> > 
> > > It is Rebuilding the Array!
> > >
> > >
> > >
> > >     ,----
> > >     | root at ying:~> omreport storage  controller
> > >     |  Controller  PERC 5/i Integrated (Embedded)
> > >     |
> > >     | Controllers
> > >     | ID                                : 0
> > >     | Status                            : Ok
> > >     | Name                              : PERC 5/i Integrated
> > >     | Slot ID                           : Embedded
> > >     | State                             : Ready
> > >     | Firmware Version                  : 5.1.1-0040
> > >     | Minimum Required Firmware Version : Not Applicable
> > >     | Driver Version                    : 00.00.03.01
> > >     | Minimum Required Driver Version   : Not Applicable
> > >     | Number of Connectors              : 2
> > >
> > >
> > > | Rebuild Rate                      : 30%
> > >
> > >     | BGI Rate                          : 30%
> > >     | Check Consistency Rate            : 30%
> > >     | Reconstruct Rate                  : 30%
> > >     | Alarm State                       : Not Applicable
> > >     | Cluster Mode                      : Not Applicable
> > >     | SCSI Initiator ID                 : Not Applicable
> > >     | Cache Memory Size                 : 256 MB
> > >     | Patrol Read Mode                  : Auto
> > >     | Patrol Read State                 : Stopped
> > >     | Patrol Read Rate                  : 30%
> > >     | Patrol Read Iterations            : 11
> > >     `----
> > 
> -- 
> ~/john
> 
> OpenPGP Sig:BA91F079
> 
> 
> 
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
-- 
Brian A. Seklecki <bseklecki at collaborativefusion.com>
Collaborative Fusion, Inc.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: This is a digitally signed message part
Url : http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20070904/5372809c/attachment.sig