Rebuild Raid

[Anthony_Leatherwood at Dell.com]

What type of hardware is it? You may have to bring the replaced drive
online.
I would give Dell tech support a call, and let them verify what is going
on.

Defintely drive 0:0 (first drive in your shelf) is having problems.
Check the timestamp
On that to make sure you are not looking at the log pre-replacement.




Ant

 

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of J. Epperson
Sent: Friday, November 30, 2007 7:27 PM
To: linux-poweredge-Lists
Subject: Re: Rebuild Raid

On Fri, November 30, 2007 17:54, Claudio De Luca wrote:
> Hi,
>
> i have check the logs and i have found only this error but nothing 
> about the controller
>
> Device failed: Array Disk 0:0 Controller 0, Channel 0
>
> Array disk removed: Array Disk 0:0 Controller 0, Channel 0
>
> Redundancy lost: Virtual Disk 0 (Virtual Disk 0) Controller 0 (PERC
> 4e/Si)
>
> Predictive Failure reported: Array Disk 0:0 Controller 0, Channel 0
>

So the first disk, disk 0, is failing.  Is that the one he replaced?

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq