OMSA omreport wrong output?

[Erik Cummings]

I would also note that I was not able to successfully update the raid firmware on several of my systems using the Linux updater.  I ended up having to make the bootable floppies and doing it that way.  Now, to note, this was on my 1955's and my 1650's.  The 1950 and 1750 and 2970 just have NOT been updated at this point!

Erik


> -----Original Message-----
> From: linux-poweredge-bounces at dell.com [mailto:linux-poweredge-
> bounces at dell.com] On Behalf Of Tom Brown
> Sent: Monday, November 12, 2007 6:40 AM
> To: Adrian Gajan
> Cc: linux-poweredge at dell.com
> Subject: Re: OMSA omreport wrong output?
> 
> 
> >
> > I have few PE 1850 boxes, where Raid Firmware upgrade was executed,
> but
> > I always get an "degraded" State shown:
> >
> > Controllers
> > ID                                : 0
> > Status                            : Non-Critical
> > Name                              : PERC 4e/Si
> > Slot ID                           : Slot Not Available
> > State                             : Degraded
> > Firmware Version                  : 513O
> > Minimum Required Firmware Version : 521S
> >
> >
> 
> 
> have you rebooted the box since the firmware was updated? Its showing
> as
> below the minimum required and hence the alert.
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq