FW: Antwort: Re: how to activate sensors in ipmitool?

[L.P.H. van Belle]

Wel on my PE2850 im getting.

myservername:~# ipmitool sensor

Temp             | 35.000     | degrees C  | ok    | na        | na        |
na        | 120.000   | 125.000   | na
Temp             | 38.000     | degrees C  | ok    | na        | na        |
na        | 120.000   | 125.000   | na
Ambient Temp     | 19.000     | degrees C  | ok    | na        | 3.000     |
8.000     | 42.000    | 47.000    | na
Planar Temp      | 32.000     | degrees C  | ok    | na        | 3.000     |
8.000     | 67.000    | 72.000    | na
Riser Temp       | 26.000     | degrees C  | ok    | na        | 3.000     |
8.000     | 57.000    | 62.000    | na
Temp             | 40.000     | degrees C  | ok    | 64.000    | na        |
0.000     | -128.000  | na        | na
Temp             | 40.000     | degrees C  | ok    | 64.000    | na        |
0.000     | -128.000  | na        | na
Temp             | 50.000     | degrees C  | ok    | na        | na        |
na        | 120.000   | 125.000   | na
Temp             | 50.000     | degrees C  | ok    | na        | na        |
na        | 120.000   | 125.000   | na
Ambient Temp     | 23.000     | degrees C  | ok    | na        | 3.000     |
8.000     | 42.000    | 47.000    | na
Planar Temp      | 40.000     | degrees C  | ok    | na        | 3.000     |
8.000     | 67.000    | 72.000    | na
Riser Temp       | 40.000     | degrees C  | ok    | na        | 3.000     |
8.000     | 57.000    | 62.000    | na
Temp             | 40.000     | degrees C  | ok    | 64.000    | na        |
0.000     | -128.000  | na        | na
Temp             | 40.000     | degrees C  | ok    | 64.000    | na        |
0.000     | -128.000  | na        | na
CMOS Battery     | 3.109      | Volts      | ok    | na        | 2.645     |
na        | na        | na        | na

BUT the big question.

Is YOUR PE running AMD CPU ???  
Search the list about this issue.


Louis

-----Oorspronkelijk bericht-----
Van: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] Namens Peter Kjellstrom
Verzonden: woensdag 7 november 2007 16:39
Aan: linux-poweredge at dell.com
CC: markus.hegerkamp at intermoves.de
Onderwerp: Re: Antwort: Re: how to activate sensors in ipmitool?

First, please don't e-mail me, e-mail the list.

On Wednesday 07 November 2007, heiner.wulfhorst at intermoves.de wrote:
> We are using PE 2950 and 860...
>
> Tthere seems to be data for CPU temp, because  it says "Not Readable"
> instead of "disabled"...

You're looking at the wrong lines I think. The ones that are probably
cpu-temp 
are the ones called "Temp" and labeled "disabled".

> Any Ideas?
> We'd really like to get Information about how hot our CPUs are...

If you could enable it you'd still not get the absolute temperature. These 
CPUs only give relative numbers. One example, if it's 10 degrees below 
critical temp the it will report "-10". And what is critical differs between

CPUs.

/Peter

> This is the output of ipmitool sdr:
> Temp             | disabled          | ns
> Temp             | disabled          | ns
> Temp             | disabled          | ns
> Temp             | disabled          | ns
^^^ probably the cpu-temp
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20071107/40a07589/attachment.sig 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ATT00469.txt
Url: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20071107/40a07589/attachment.txt