SMASH CLP On Dell 1950/2950

[Ram, Prashanth]

Hi Mike:
	I assume that SMASH is a part of the DRAC card, but not with the
built-in BMC?
	
Thanks!
Prashanth


-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Mike M
Sent: Friday, November 02, 2007 4:39 PM
To: linux poweredge
Subject: Re: SMASH CLP On Dell 1950/2950

On 11/2/07, Ram, Prashanth <Prashanth.Ram at stratus.com> wrote:
> Has anyone used the SMASH protocol on the Dells, if so how? I've
> read documents that tell you it's possible, but have not found any
> documentation that tells you how to do it.

To access the SMASH CLI, you just need to SSH into the DRAC
(root/calvin is the default username/password).  Once you login, type
'smclp' at the prompt, and you'll be in the SMASH console.  This
document goes into a little detail on getting started:

http://www.dell.com/downloads/global/power/ps1q06-20050292-Rakoff.pdf

So far my experience with it has been pretty good for basic
power-on/power-off functions, although the CLI is pretty sparse,
especially when compared to other management cards such as the Sun
iLOM.

Mikle

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq