May 2007 Archives by thread
Starting: Tue May 1 00:55:17 CST 2007
Ending: Thu May 31 23:17:21 CST 2007
Messages: 615
- Shrink RAID5?
Scott Wessels
- Fwd: RHEL on PE2950/CX300 - supported configuration?
Jim Shirley
- PE2550 Serial Ports not working
Bob Fish
- Latest Perc5E firmware and drivers...
Ken Kleiner
- attempt to access beyond end of device
David Titzer
- attempt to access beyond end of device
David Titzer
- TCP/IP Offload Engine
LING Ka Hong
- Latest Perc5E firmware and drivers...
Mansell, Gary
- Problem building php 4.4.6 and apache 1.3.37 on RHEL 4
Kuba Ober
- Perc 5/i Firmware updates....
Fred Skrotzki
- drac 5 virtual media plugin
Vincent Janelle
- Odd error messages on a 2950
Sam Flory
- No storage info from OMSA 5.1 on Debian Etch (revisited)
Sergi Baila
- PE1850 does not boot when using initrd image
Reiner Dassing
- RHEL4 U5 and NICs order/naming
wolf2k5
- Has anyone sucessfully installed Ubuntu on a PE 2650
Mansell, Gary
- No storage info from OMSA 5.1 on Debian Etch (SOLUTION)
Sergi Baila
- Dell Issues for Red Hat Linux 9 1600.
Adam Williams
- Issue with srvadmin-deng RPM "Requires" for net-snmp
McKee, Shawn
- SATA controller on Dell SC1435
Peter Kjellstrom
- PowerEdge 2950 Raid
Patrick_Boyd at Dell.com
- Upgrading from 32bit to 64 bit OS on 2950
McDougall, Marshall (FSH)
- check to see if a drive has failed
Adam Williams
- make_driver_dir.py on http://linux.dell.com/yum/hardware/_tools/
Vincent Janelle
- Older PowerEdge recommendations for an Inexpensive NAS?
Jack Murgia
- PowerEdge Ampere
Giorgio Zarrelli
- Cheap SCSI
Marcus Bointon
- PowerEdge, CentOS and LTO2: Tape is extremely slow 2 to 4 MB/s
Weichmann, Patrick
- PowerEdge, CentOS and LTO2: Tape is extremely slow 2 to 4 MB/s
Billinghurst, David (RTATECH)
- Cheap SCSI
Hostmaster
- check to see if a drive has failed
Andrew Hall
- bootstrap.cgi in Dell yum software repoHello, The file bootstrap.cgi is now used to add the repo and GPG key auto-magically to a client. Couple questions: 1. Is there a way to get the source script (for mirroring) similar to the way mirrors.pl-SOURCE is provided? 2. The output of the script says # If you wish to mirror the Dell yum repository, you need to: # --> ask me to redo these instructions, because I just made it a lot easier. :) Well ok. I'm asking :-). Thanks! Eric
Eric Yablonowitz
- mirroring hardware repository
Eric Yablonowitz
- RedHat ES and AS kernels
Stephen Anderson
- bootstrap.cgi in Dell yum software repo
Eric Yablonowitz
- Perc5 + Cent OS 5.0
Fung
- yum firmware update for PERC and DRAC
Eric Yablonowitz
- yum repo status update
Michael E Brown
- SUU install problems
Al Sparks
- RedHat ES and AS kernels
Robert Wilson
- SUU install problems
Al Sparks
- can't update the bios on this PE1750, same after reboot.
Martin Hamant
- OMSA 5.1 with SNMP on a Debian system
chiel
- Bigger drives
Marcus Bointon
- Yum repo grief
Dimitri Yioulos
- Yum Server Logging
John
- PE1850 / RHEL3 ES + php5 and Mysql 5 ?
Florent Gilain
- Help ! CentOS on PE2900
Fung
- Availability and plans for upgrading to RHEL5?
Zembower, Kevin
- dell token information
Michael E Brown
- Replacing failed disk with MegaCli
Romain GALLET
- Replacing failed disk with MegaCli
Romain GALLET
- OPMN 5 failed to startup on DELL 2650 with Redhat AS 4.4
mcclnx mcc
- PE2550 and CentOS
Bruce
- PERC3: New disk is not recognized
Reiner Dassing
- SNMPD segfault with CentOS5 Xen kernel
Hostmaster
- Availability and plans for upgrading to RHEL5?
Andrew Hall
- dell token information
Michael E Brown
- Pe 860 - 1950 - 2950 - 64 bit or 32 bit Linux distros?
Giorgio Zarrelli
- MegaCli
Adam Williams
- PowerEdge 1400SC CENTOS Installer hangs at ISOLINUX 3.11 2005-09-02 Copyright...
Eduardo Sanchez
- Yum Server Logging
Hostmaster
- OPMN 5 failed to startup on DELL 2650 with Redhat AS 4.4
mcclnx mcc
- Scripting a way to discover Dell hardware...tips?
Alderman, Sean
- Pe 860 - 1950 - 2950 - 64 bit or 32 bit Linux distros?
Marcel White
- Availability and plans for upgrading to RHEL5?
Marcel White
- Dell joins Novell deal ...
Alan Bunch
- Dell Repo Problem / Error
Sturgis, Grant
- SNMPD segfault with CentOS5 Xen kernel
Richard Chan
- PE2900 CentOS raid 1 success raid 5 fail
Fung
- PE2900 CentOS raid 1 success raid 5 fail
Bahadir Kiziltan
- Locking a chassis cover (P/N MF097, SC1425)
Bogart Salzberg
- Anyone have any setup instructions for using RUG and SLES9 with the YUM Repo?
Dennis_Helleur at ca1.uscourts.gov
- PERC 5/E firmware flash stalled?
Colin Dermott
- Missing disk halts boot sequence
Bart van Kuik
- PE2950 and Linux kernel panic with PERC 5i
percipio
- Locking a chassis cover (P/N MF097, SC1425)
Hostmaster
- DRAC/5 and STONITH
Mark Watts
- Missing disk halts boot sequence
Bart van Kuik
- PE2950 : Updated Perc Firmware using SUU : now need to update drivers before reboot...
Florent Gilain
- PE2950 : Updated Perc Firmware using SUU : now need to update driversbefore reboot...
Florent Gilain
- PE2950 : Updated Perc Firmware using SUU : now need to update driversbefore reboot...
Florent Gilain
- PE2950 : Updated Perc Firmware using SUU : now need to updatedriversbefore reboot...
Florent Gilain
- yum meta-package for driver updates
Eric Yablonowitz
- PE2950 : Updated Perc Firmware using SUU : now need toupdatedriversbefore reboot...
Florent Gilain
- srvadmin-deng
Craig White
- Missing disk halts boot sequence
James Pattie
- Abysmal Tape Drive Performance on a 2850
Kuba Ober
- Frustration
Dr A V Le Blanc
- Missing disk halts boot sequence
Bart van Kuik
- Missing disk halts boot sequence
Bart van Kuik
- GCC compile options
Giorgio Zarrelli
- PE:1855 - DSA via PXE
Carl Pickering
- up2date stuck using Dell yum repository
Tim Larson
- adding 300GB scsi drives to a PE2600 question
Adam Williams
- CentOS 3 install error from repo
Jim Nelson
- where can I download OPMN 5.2 for LINUX
mcclnx mcc
- yum meta-package for driver updates
Bart van Kuik
- alt+sysrq combinations on PE KVM switches
Robert Wehner
- Centos 5 / linux on poweredge 2400
Emanuel Salagean
- Centos 5 / linux on poweredge 2400
Emanuel Salagean
- Problem with giga-port on PowerEdge 2550
Robert Hagg
- PERC 3si manual
Marios Pittas
- reinstalling the Utility partition, F10 on 2550
Robert Hagg
- CentOS 3 install error from repo
Michael E Brown
- How to restore RHN up2date default config file for unsing REDHAT mirrors ?
Florent Gilain
- Poweredge 2650 RHEL4 install PERC3D/I RAID disk errors
Tim Pickard
- Debian OMSA 5.2 package
Sander Keemink
- Utility partition
Bart van Kuik
- PE 860: Cannot boot from USB
Mi
- reinstalling the Utility partition, F10 on 2550
Robert Hagg
- reinstalling the Utility partition, F10 on 2550 (fwd)
Robert Hagg
- RHN monitoring probe for PERC?
Reid Wightman
- Linux hosts on the MD3000 with a failover setup
Kristian T. Knudsen
- Hardware monitoring for OpenSUSE?
kevin at indigospring.co.uk
- OMSA 5.1 RPMS + Centos 4.4 + Net-SNMP 5.4 = no install?
Duncan Hill
- RHN monitoring probe for PERC?
Ben
- OMSA reports VMware as the OS?
Duncan Hill
- Weird fan behaviour on a 2950
Duncan Hill
- Disable SMI on new BMC?
Russell Johnson
- Experience setting processor affinity with RHEL
John Murtari
- firmware-tools package?
Reid Wightman
- Dell PE 1u rack servers
John Nietzsche
- Red Hat Summit 2007 Dell presentation
Michael E Brown
- Starting dsm_sa_datamgr32d FAILED after kernel tune
Michael E Brown
- OMSA 5.2 on 64 bit (RHEL5) Dell PowerEdge SC440
Carlos Ribeiro
- Re: Linux-PowerEdge Digest, Vol 32, Issue 67
michalwd1979
- OT: list sign off
John Nietzsche
- determining if two processors
Rudmann, Inc.
- megaraid (PERC 4e/DC) resets under I/O load
Kilian CAVALOTTI
- Perc 5/i and SMARTD
Andrea B.
- Server locks during software mirror reconstruction
David Hubbard
- 1650 - clearing orange blinking alert
Craig White
- Server locks during software mirror reconstruction
David Hubbard
- OMSA on PowerEdge 1430 with SAS Raid 1
Mark de Blois
- Unable to mount sdb1 after upgrade to CentOS 4.5
Kevin Kwast
- CSR Limitation on DRAC/MC
Chris Hills
- vmotion between dual core 5160 and quad core X5355
Blackburn, Marvin
- srvadmin-install.sh on CentOS
Al Sparks
- srvadmin-install.sh on CentOS
Wayne Pinette
- RHEL 4 WS driver for a PE 1435sc?
Jack Murgia
- Linux-PowerEdge Digest, Vol 32, Issue 65
Robert Wehner
- How to create the /etc/modprobe.conf file from scratch
wolf2k5
- PE2950 with CentOS 5: What drivers best to use???
Byron
- Monitoring network traffic on a PE2950 (Onboard Broadcom Gigabit ctrl)
Byron
- About KIPMI0 process
hai wu
- agpart error..
Robert Hagg
- RHEL4 U5 and NICs order/naming
Furlong, John
- bios_dev_name debian packages
Rudy Gevaert
- Graphing multi-core CPUs with MRTG
Byron
- funny question about perc3/di's
Reid Wightman
- SCSI issue
Mark Foster
- dellomsa on debian
Antonin Hily
- Perl 5/E and 'import foreign configuration'
Steve Thompson
- OMSA Reports & SNMP
madhu babu
- SNMP write request failed
Al Sparks
- ubuntu 7.04 Install cannot find hard drives, with 9k646 Raid card
Mark Newbegin
- Asset Tag under GNU/Linux
Giorgio Zarrelli
- Correct order for upgrading a PE2950 and MD1000
Jens Dueholm Christensen
- yum repository status -- New Servers!
Michael E Brown
- Asset Tag under GNU/Linux
peterd at lexmark.com
- RHEL5 and PERC 4 monitoring (PE1750)
Matthias Saou
- srvadmin-racvnc and RHELv5
Craig White
- ubuntu 7.04 Install cannot find hard drives, with 9k646 Raid card
Scott_Purcell at Dell.com
- Degraded array, upgrade firmware
chiel
- Errors configuring server to access Dell yum Repo
Craig Morris
- SC440, SAS 5/i and RAID
Tom Z. Napierala
- Installing OMSA on 6950 running Oracle Enterprise Linux (rebranded RHEL 4)
Peter Verhoeven
- dell 2650 and kernel 2.6.21
Rafal Suchowirski
- Question on DRAC...
PBrunnen at bccnetworks.net
- Question on DRAC...
PBrunnen at bccnetworks.net
- how to install FC3 onto a PowerEdge 2950 with perc5/i and sas drives?
Fred Ziegler
- OMSA and ESX
Sean Dilda
- Installing OMSA on 6950 running Oracle Enterprise Linux
Marcel White
- DRAC initialization failure
Naidu Bollineni
- OM 5.2, IPMI, and Fedora
Jeff Fishbaugh
- DRAC initialization failure
Naidu Bollineni
- System failure light and RAID ?
Hannu Puhakka
- CentOS 5.0 Final + OMSA 5.2 on PE 1750
J Longsford
- Firmware version is out of date
Peter Verhoeven
- PE2800 UPS
Euroka
- Temperature monitoring with OpenIPMI on Poweredge x9xx
Olivier BONHOMME
- Upgrading to OMSA 5.20 from Dell repo ?
Florent Gilain
- Problem upgrading DRAC4 FW to latest using SUU or command line..
Florent Gilain
- Upgrading to OMSA 5.20 from Dell repo ?
Florent Gilain
- xen vs native on PE2950
Johan Loubser
- Sporadic drive problems on PE1950
Randy Martin
- Weird fan behaviour on a 2950
Raghavendra_Biligiri at Dell.com
- Upgrading to OMSA 5.20 from Dell repo ?
Florent Gilain
- OMSA says battery degraded on 4/DI
Adam Williams
- 1855 won't see a full 16GB of RAM
Nathan Hruby
- Poweredge 850 Preventive Battery Maintenance?
Adrian Walker
- Firmware update trouble
Marcus Bointon
- Fedora 4.0 - PE SC440. Does not detect the network card
Tullio Barbieri
- ipmitool bootdev pxe
Rudy Gevaert
- OMSA says battery degraded on 4/DI
Patrick_Boyd at Dell.com
- md 1000 & dell2950
Shanti kishore Balusu
- Disabling automatic reconstruct on Perc5e
Scott Dungan
- Determine whether or not a DRAC5 is installed
Mike M
- IPMI over LAN, which protocol version?
Celso K. Webber
- RAID 1 vs RAID 10
Zach Bagnall
- IPMI over LAN, which protocol version?
Celso K. Webber
- md 1000 & dell2950
Robert von Bismarck
- Problems PXE booting Dell Poweredge 2550
Gregg Phillips
- What are my options for expanding storage on a PE 1550?
Gene Hastings
- 1950 Utility partition restore without cdrom
Martin Flemming
- Call for input: customer contributed RPMS in the unofficial repository
Michael E Brown
- Call for input: customer contributed RPMS in the unofficial repository
Hostmaster
- SATA on older PE SCSI machines
Terry Gliedt
- does an OptiPlex GX260 have any PCI Xpress or PCI-X slots?
dell_list at socalweb.com
- openmanage timeout configuration?
Reid Wightman
- Call for input: customer contributed RPMS in the unofficial repository
Michael St. Laurent
Last message date:
Thu May 31 23:17:21 CST 2007
Archived on: Thu May 31 23:17:34 CST 2007
This archive was generated by
Pipermail 0.09 (Mailman edition).