May 2007 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue May 1 00:55:17 CST 2007
Ending: Thu May 31 23:17:21 CST 2007
Messages: 615

• Graphing multi-core CPUs with MRTG   Aaron
• GCC compile options   Peter Abrahamsen
• Scripting a way to discover Dell hardware...tips?   Alderman, Sean
• Scripting a way to discover Dell hardware...tips?   Alderman, Sean
• PowerEdge Ampere   Jerome Alet
• check to see if a drive has failed   Barry Allard
• RedHat ES and AS kernels   Stephen Anderson
• 1855 won't see a full 16GB of RAM   Stephen Anderson
• OMSA 5.1 with SNMP on a Debian system   Cesar Avalos
• OMSA 5.1 with SNMP on a Debian system   Cesar Avalos
• Perc 5/i and SMARTD   Andrea B.
• Perc 5/i and SMARTD   Andrea B.
• Perc 5/i and SMARTD   Andrea B.
• Temperature monitoring with OpenIPMI on Poweredge x9xx   Olivier BONHOMME
• RAID 1 vs RAID 10   Zach Bagnall
• RAID 1 vs RAID 10   Zach Bagnall
• No storage info from OMSA 5.1 on Debian Etch (revisited)   Sergi Baila
• No storage info from OMSA 5.1 on Debian Etch (SOLUTION)   Sergi Baila
• No storage info from OMSA 5.1 on Debian Etch (SOLUTION)   Sergi Baila
• md 1000 & dell2950   Shanti kishore Balusu
• md 1000 & dell2950   Shanti kishore Balusu
• md 1000 & dell2950   Shanti kishore Balusu
• Fedora 4.0 - PE SC440. Does not detect the network card   Tullio Barbieri
• OMSA on PowerEdge 1430 with SAS Raid 1   Tullio Barbieri
• RHN monitoring probe for PERC?   Ben
• RHN monitoring probe for PERC?   Ben
• RHN monitoring probe for PERC?   Ben
• Dell joins Novell deal ...   Bill
• PowerEdge, CentOS and LTO2: Tape is extremely slow 2 to 4 MB/s   Billinghurst, David (RTATECH)
• md 1000 & dell2950   Robert von Bismarck
• vmotion between dual core 5160 and quad core X5355   Blackburn, Marvin
• Frustration   Dr A V Le Blanc
• Frustration   Dr A V Le Blanc
• Frustration   Dr A V Le Blanc
• OMSA on PowerEdge 1430 with SAS Raid 1   Mark de Blois
• No storage info from OMSA 5.1 on Debian Etch (SOLUTION)   Marcus Bointon
• check to see if a drive has failed   Marcus Bointon
• PowerEdge Ampere   Marcus Bointon
• Cheap SCSI   Marcus Bointon
• Bigger drives   Marcus Bointon
• Replacing failed disk with MegaCli   Marcus Bointon
• Debian OMSA 5.2 package   Marcus Bointon
• Debian OMSA 5.2 package   Marcus Bointon
• Firmware update trouble   Marcus Bointon
• Firmware update trouble   Marcus Bointon
• DRAC initialization failure   Naidu Bollineni
• DRAC initialization failure   Naidu Bollineni
• yum repo status update   Chmouel Boudjnah
• Call for input: customer contributed RPMS in the unofficial repository   Chmouel Boudjnah
• Call for input: customer contributed RPMS in the unofficial repository   Chmouel Boudjnah
• drac 5 virtual media plugin   Scott Briggs
• check to see if a drive has failed   Scott Briggs
• OMSA 5.1 with SNMP on a Debian system   Scott Briggs
• attempt to access beyond end of device   Michael E Brown
• drac 5 virtual media plugin   Michael E Brown
• Issue with srvadmin-deng RPM "Requires" for net-snmp   Michael E Brown
• TCP/IP Offload Engine   Michael E Brown
• make_driver_dir.py on http://linux.dell.com/yum/hardware/_tools/   Michael E Brown
• make_driver_dir.py on http://linux.dell.com/yum/hardware/_tools/   Michael E Brown
• Issue with srvadmin-deng RPM "Requires" for net-snmp   Michael E Brown
• bootstrap.cgi in Dell yum software repoHello, The file bootstrap.cgi is now used to add the repo and GPG key auto-magically to a client. Couple questions: 1. Is there a way to get the source script (for mirroring) similar to the way mirrors.pl-SOURCE is provided? 2. The output of the script says # If you wish to mirror the Dell yum repository, you need to: # --> ask me to redo these instructions, because I just made it a lot easier. :) Well ok. I'm asking :-). Thanks! Eric   Michael E Brown
• mirroring hardware repository   Michael E Brown
• mirroring hardware repository   Michael E Brown
• yum repo status update   Michael E Brown
• mirroring hardware repository   Michael E Brown
• yum repo status update   Michael E Brown
• Yum Server Logging   Michael E Brown
• yum firmware update for PERC and DRAC   Michael E Brown
• dell token information   Michael E Brown
• Yum repo grief   Michael E Brown
• can't update the bios on this PE1750, same after reboot.   Michael E Brown
• dell token information   Michael E Brown
• Yum repo grief   Michael E Brown
• Scripting a way to discover Dell hardware...tips?   Michael E Brown
• Dell Repo Problem / Error   Michael E Brown
• can't update the bios on this PE1750, same after reboot.   Michael E Brown
• up2date stuck using Dell yum repository   Michael E Brown
• Dell Repo Problem / Error   Michael E Brown
• yum meta-package for driver updates   Michael E Brown
• Frustration   Michael E Brown
• Availability and plans for upgrading to RHEL5?   Michael E Brown
• Anyone have any setup instructions for using RUG and SLES9 with the YUM Repo?   Michael E Brown
• 1855 - DSA via PXE [Scanned]   Michael E Brown
• 1855 - DSA via PXE [Scanned]   Michael E Brown
• Dell Repo Problem / Error   Michael E Brown
• CentOS 3 install error from repo   Michael E Brown
• Dell Repo Problem / Error   Michael E Brown
• Dell Repo Problem / Error   Michael E Brown
• Dell Repo Problem / Error   Michael E Brown
• Dell Repo Problem / Error   Michael E Brown
• [FIXED] Re: Dell Repo Problem / Error   Michael E Brown
• How to restore RHN up2date default config file for unsing REDHAT mirrors ?   Michael E Brown
• reinstalling the Utility partition, F10 on 2550   Michael E Brown
• Red Hat Summit 2007 Dell presentation   Michael E Brown
• Red Hat Summit 2007 Dell presentation   Michael E Brown
• Hardware monitoring for OpenSUSE?   Michael E Brown
• Hardware monitoring for OpenSUSE?   Michael E Brown
• OMSA 5.1 RPMS + Centos 4.4 + Net-SNMP 5.4 = no install?   Michael E Brown
• Disable SMI on new BMC?   Michael E Brown
• Disable SMI on new BMC?   Michael E Brown
• Disable SMI on new BMC?   Michael E Brown
• firmware-tools package?   Michael E Brown
• Starting dsm_sa_datamgr32d FAILED after kernel tune   Michael E Brown
• firmware-tools package?   Michael E Brown
• OMSA 5.2 on 64 bit (RHEL5) Dell PowerEdge SC440   Michael E Brown
• Perc 5/i and SMARTD   Michael E Brown
• shmmax: Starting dsm_sa_datamgr32d FAILED after kernel tune   Michael E Brown
• Perc 5/i and SMARTD   Michael E Brown
• Perc 5/i and SMARTD   Michael E Brown
• srvadmin-install.sh on CentOS   Michael E Brown
• Unable to mount sdb1 after upgrade to CentOS 4.5   Michael E Brown
• firmware-tools package?   Michael E Brown
• yum repository status -- New Servers!   Michael E Brown
• Asset Tag under GNU/Linux   Michael E Brown
• Asset Tag under GNU/Linux   Michael E Brown
• RHEL5 and PERC 4 monitoring (PE1750) (solved)   Michael E Brown
• About KIPMI0 process   Michael E Brown
• RHEL5 and PERC 4 monitoring (PE1750) (solved)   Michael E Brown
• Errors configuring server to access Dell yum Repo   Michael E Brown
• About KIPMI0 process   Michael E Brown
• Upgrading to OMSA 5.20 from Dell repo ?   Michael E Brown
• Question on DRAC...   Michael E Brown
• About KIPMI0 process   Michael E Brown
• About KIPMI0 process   Michael E Brown
• Upgrading to OMSA 5.20 from Dell repo ?   Michael E Brown
• Firmware update trouble   Michael E Brown
• Firmware version is out of date   Michael E Brown
• Call for input: customer contributed RPMS in the unofficial repository   Michael E Brown
• Call for input: customer contributed RPMS in the unofficial repository   Michael E Brown
• Call for input: customer contributed RPMS in the unofficial repository   Michael E Brown
• RHN monitoring probe for PERC?   Tom Brown
• OMSA Install RHEL4, PE 6950   Tom Brown
• OMSA Reports & SNMP   Tom Brown
• PE2550 and CentOS   Bruce
• Dell joins Novell deal ...   Alan Bunch
• Weird fan behaviour on a 2950   Dirkjan Bussink
• PE2950 with CentOS 5: What drivers best to use???   Dirkjan Bussink
• About KIPMI0 process   Dirkjan Bussink
• OMSA on PowerEdge 1430 with SAS Raid 1   Dirkjan Bussink
• Weird fan behaviour on a 2950   Dirkjan Bussink
• OM 5.2, IPMI, and Fedora   Dirkjan Bussink
• Weird fan behaviour on a 2950   Dirkjan Bussink
• IPMI over LAN, which protocol version?   Dirkjan Bussink
• Weird fan behaviour on a 2950   Dirkjan Bussink
• PE2950 with CentOS 5: What drivers best to use???   Byron
• Monitoring network traffic on a PE2950 (Onboard Broadcom Gigabit ctrl)   Byron
• Graphing multi-core CPUs with MRTG   Byron
• Graphing multi-core CPUs with MRTG   Byron
• alt+sysrq combinations on PE KVM switches   Kilian CAVALOTTI
• megaraid (PERC 4e/DC) resets under I/O load   Kilian CAVALOTTI
• dell 2650 and kernel 2.6.21   Antoine Cailliau
• SNMPD segfault with CentOS5 Xen kernel   Richard Chan
• SNMPD segfault with CentOS5 Xen kernel   Richard Chan
• PE2950 with CentOS 5: What drivers best to use???   Richard Chan
• SC440, SAS 5/i and RAID   Richard Chan
• PowerEdge 2950 Raid   Jens Dueholm Christensen
• Correct order for upgrading a PE2950 and MD1000   Jens Dueholm Christensen
• determining if two processors   Colvin, Joshua
• PERC 3si manual   Gianluca_Allegretta at DELL.com
• Poweredge 2650 RHEL4 install PERC3D/I RAID disk errors   Gianluca_Allegretta at DELL.com
• Missing disk halts boot sequence   Mark Dadgar
• PE1850 does not boot when using initrd image   Reiner Dassing
• PE1850 does not boot when using initrd image   Reiner Dassing
• PERC3: New disk is not recognized   Reiner Dassing
• determining if two processors   Brent_Clements at Dell.com
• Frustration   Diego_Leccardi at Dell.com
• CentOS 3 install error from repo   Michael_E_Brown at Dell.com
• where can I download OPMN 5.2 for LINUX   Michael_E_Brown at Dell.com
• yum firmware update for PERC and DRAC   Michael_E_Brown at Dell.com
• Firmware update trouble   Michael_E_Brown at Dell.com
• Sporadic drive problems on PE1950   Nico_Terrey at Dell.com
• md 1000 & dell2950   Nico_Terrey at Dell.com
• md 1000 & dell2950   Nico_Terrey at Dell.com
• Shrink RAID5?   Patrick_Boyd at Dell.com
• PowerEdge 2950 Raid   Patrick_Boyd at Dell.com
• Odd error messages on a 2950   Patrick_Boyd at Dell.com
• No storage info from OMSA 5.1 on Debian Etch (SOLUTION)   Patrick_Boyd at Dell.com
• No storage info from OMSA 5.1 on Debian Etch (SOLUTION)   Patrick_Boyd at Dell.com
• check to see if a drive has failed   Patrick_Boyd at Dell.com
• PowerEdge 2950 Raid   Patrick_Boyd at Dell.com
• Replacing failed disk with MegaCli   Patrick_Boyd at Dell.com
• Replacing failed disk with MegaCli   Patrick_Boyd at Dell.com
• PE2900 CentOS raid 1 success raid 5 fail   Patrick_Boyd at Dell.com
• PE2950 and Linux kernel panic with PERC 5i   Patrick_Boyd at Dell.com
• PE2950 : Updated Perc Firmware using SUU : now need to update driversbefore reboot...   Patrick_Boyd at Dell.com
• PE2950 : Updated Perc Firmware using SUU : now need to updatedriversbefore reboot...   Patrick_Boyd at Dell.com
• 1855 - DSA via PXE   Patrick_Boyd at Dell.com
• 1855 - DSA via PXE [Scanned]   Patrick_Boyd at Dell.com
• PERC 3si manual   Patrick_Boyd at Dell.com
• OMSA reports VMware as the OS?   Patrick_Boyd at Dell.com
• Perc 5/i and SMARTD   Patrick_Boyd at Dell.com
• Perc 5/i and SMARTD   Patrick_Boyd at Dell.com
• Perc 5/i and SMARTD   Patrick_Boyd at Dell.com
• funny question about perc3/di's   Patrick_Boyd at Dell.com
• Upgrading to OMSA 5.20 from Dell repo ?   Patrick_Boyd at Dell.com
• OMSA says battery degraded on 4/DI   Patrick_Boyd at Dell.com
• OMSA says battery degraded on 4/DI   Patrick_Boyd at Dell.com
• Disabling automatic reconstruct on Perc5e   Patrick_Boyd at Dell.com
• Problems PXE booting Dell Poweredge 2550   Patrick_Boyd at Dell.com
• reinstalling the Utility partition, F10 on 2550   Paul_Maia at Dell.com
• Weird fan behaviour on a 2950   Raghavendra_Biligiri at Dell.com
• Weird fan behaviour on a 2950   Raghavendra_Biligiri at Dell.com
• ubuntu 7.04 Install cannot find hard drives, with 9k646 Raid card   Scott_Purcell at Dell.com
• Weird fan behaviour on a 2950   Shyam_Iyer at Dell.com
• Sporadic drive problems on PE1950   Shyam_Iyer at Dell.com
• PE 860: Cannot boot from USB   Stuart_Hayes at Dell.com
• PE2950 : Updated Perc Firmware using SUU : now need toupdatedriversbefore reboot...   Thomas_Chenault at Dell.com
• Frustration   Troy_Johnson at Dell.com
• PERC 5/E firmware flash stalled?   Colin Dermott
• Availability and plans for upgrading to RHEL5?   Sean Dilda
• OMSA and ESX   Sean Dilda
• Locking a chassis cover (P/N MF097, SC1425)   Ray Van Dolson
• determining if two processors   Ray Van Dolson
• Server locks during software mirror reconstruction   Ray Van Dolson
• About KIPMI0 process   Ray Van Dolson
• Availability and plans for upgrading to RHEL5?   Matt Domsch
• About KIPMI0 process   Matt Domsch
• Disabling automatic reconstruct on Perc5e   Scott Dungan
• Disabling automatic reconstruct on Perc5e   Scott Dungan
• Disabling automatic reconstruct on Perc5e   Scott Dungan
• Frustration   J. Epperson
• PE2800 UPS   Euroka
• PE2550 Serial Ports not working   Bob Fish
• OM 5.2, IPMI, and Fedora   Jeff Fishbaugh
• 1950 Utility partition restore without cdrom   Martin Flemming
• TCP/IP Offload Engine   Sam Flory
• Odd error messages on a 2950   Sam Flory
• RedHat ES and AS kernels   Sam Flory
• Upgrading from 32bit to 64 bit OS on 2950   Sam Flory
• Replacing failed disk with MegaCli   Sam Flory
• Availability and plans for upgrading to RHEL5?   Sam Flory
• Availability and plans for upgrading to RHEL5?   Sam Flory
• Experience setting processor affinity with RHEL   Sam Flory
• determining if two processors   Sam Flory
• RHEL 4 WS driver for a PE 1435sc?   Sam Flory
• ipmitool bootdev pxe   Sam Flory
• RHEL4 U5 and NICs order/naming   Sam Folk-Williams
• mirroring hardware repository   Mark Foster
• Scripting a way to discover Dell hardware...tips?   Mark Foster
• SCSI issue   Mark Foster
• Perc5 + Cent OS 5.0   Fung
• Help ! CentOS on PE2900   Fung
• PE2900 CentOS raid 1 success raid 5 fail   Fung
• PE2900 CentOS raid 1 success raid 5 fail   Fung
• PE2900 CentOS raid 1 success raid 5 fail   Fung
• Help ! CentOS on PE2900   Fung, TONG
• RHEL4 U5 and NICs order/naming   Furlong, John
• Replacing failed disk with MegaCli   Romain GALLET
• Replacing failed disk with MegaCli   Romain GALLET
• RHEL4 U5 and NICs order/naming   Matthew Geier
• Upgrading from 32bit to 64 bit OS on 2950   Matthew Geier
• bios_dev_name debian packages   Rudy Gevaert
• ipmitool bootdev pxe   Rudy Gevaert
• PE1850 / RHEL3 ES + php5 and Mysql 5 ?   Florent Gilain
• PE2950 : Updated Perc Firmware using SUU : now need to update drivers before reboot...   Florent Gilain
• PE2950 : Updated Perc Firmware using SUU : now need to update driversbefore reboot...   Florent Gilain
• PE2950 : Updated Perc Firmware using SUU : now need to update driversbefore reboot...   Florent Gilain
• PE2950 : Updated Perc Firmware using SUU : now need to updatedriversbefore reboot...   Florent Gilain
• PE2950 : Updated Perc Firmware using SUU : now need toupdatedriversbefore reboot...   Florent Gilain
• How to restore RHN up2date default config file for unsing REDHAT mirrors ?   Florent Gilain
• Upgrading to OMSA 5.20 from Dell repo ?   Florent Gilain
• Problem upgrading DRAC4 FW to latest using SUU or command line..   Florent Gilain
• Upgrading to OMSA 5.20 from Dell repo ?   Florent Gilain
• Upgrading to OMSA 5.20 from Dell repo ?   Florent Gilain
• SATA on older PE SCSI machines   Terry Gliedt
• RAID 1 vs RAID 10   Robert Gravsjö
• Problem with giga-port on PowerEdge 2550   Robert Hagg
• reinstalling the Utility partition, F10 on 2550   Robert Hagg
• reinstalling the Utility partition, F10 on 2550   Robert Hagg
• reinstalling the Utility partition, F10 on 2550 (fwd)   Robert Hagg
• agpart error..   Robert Hagg
• check to see if a drive has failed   Andrew Hall
• Availability and plans for upgrading to RHEL5?   Andrew Hall
• can't update the bios on this PE1750, same after reboot.   Martin Hamant
• can't update the bios on this PE1750, same after reboot.   Martin Hamant
• MegaCli   Martin Hamant
• System failure light and RAID ?   Martin Hamant
• TCP/IP Offload Engine   Hank
• TCP/IP Offload Engine   Hank
• TCP/IP Offload Engine   Hank
• PowerEdge, CentOS and LTO2: Tape is extremely slow 2 to 4 MB/s   Hank
• PE2550 and CentOS   Hank
• funny question about perc3/di's   Hank
• What are my options for expanding storage on a PE 1550?   Gene Hastings
• Upgrading from 32bit to 64 bit OS on 2950   Brendan Heading
• Upgrading from 32bit to 64 bit OS on 2950   Brendan Heading
• OMSA 5.1 RPMS + Centos 4.4 + Net-SNMP 5.4 = no install?   Duncan Hill
• OMSA reports VMware as the OS?   Duncan Hill
• Weird fan behaviour on a 2950   Duncan Hill
• Weird fan behaviour on a 2950   Duncan Hill
• Weird fan behaviour on a 2950   Duncan Hill
• OT: list sign off   Duncan Hill
• Weird fan behaviour on a 2950   Duncan Hill
• Weird fan behaviour on a 2950   Duncan Hill
• CSR Limitation on DRAC/MC   Chris Hills
• dellomsa on debian   Antonin Hily
• Cheap SCSI   Alan Hoang
• SATA on older PE SCSI machines   Alan Hoang
• drac 5 virtual media plugin   John Hodrien
• PE1850 does not boot when using initrd image   John Hodrien
• Upgrading from 32bit to 64 bit OS on 2950   John Hodrien
• Availability and plans for upgrading to RHEL5?   John Hodrien
• Pe 860 - 1950 - 2950 - 64 bit or 32 bit Linux distros?   John Hodrien
• Pe 860 - 1950 - 2950 - 64 bit or 32 bit Linux distros?   John Hodrien
• PowerEdge 1400SC CENTOS Installer hangs at ISOLINUX 3.11 2005-09-02 Copyright...   John Hodrien
• Missing disk halts boot sequence   John Hodrien
• alt+sysrq combinations on PE KVM switches   John Hodrien
• Disabling automatic reconstruct on Perc5e   John Hodrien
• TCP/IP Offload Engine   LING Ka Hong
• Cheap SCSI   Hostmaster
• SNMPD segfault with CentOS5 Xen kernel   Hostmaster
• Yum Server Logging   Hostmaster
• Locking a chassis cover (P/N MF097, SC1425)   Hostmaster
• Call for input: customer contributed RPMS in the unofficial repository   Hostmaster
• 1855 won't see a full 16GB of RAM   Nathan Hruby
• 1855 won't see a full 16GB of RAM   Nathan Hruby
• Server locks during software mirror reconstruction   David Hubbard
• Server locks during software mirror reconstruction   David Hubbard
• Debian OMSA 5.2 package   Ismail
• srvadmin-install.sh on CentOS   J.J.
• PE2550 Serial Ports not working   Vincent Janelle
• drac 5 virtual media plugin   Vincent Janelle
• make_driver_dir.py on http://linux.dell.com/yum/hardware/_tools/   Vincent Janelle
• Missing disk halts boot sequence   Vincent Janelle
• Question on DRAC...   Vincent Janelle
• Weird fan behaviour on a 2950   Jason
• Yum Server Logging   John
• Availability and plans for upgrading to RHEL5?   John
• Perc 5/i and SMARTD   John
• Disable SMI on new BMC?   Russell Johnson
• Disable SMI on new BMC?   Russell Johnson
• Disable SMI on new BMC?   Russell Johnson
• SNMPD segfault with CentOS5 Xen kernel   Philipp Jäggi
• SNMPD segfault with CentOS5 Xen kernel   Philipp Jäggi
• Debian OMSA 5.2 package   Sander Keemink
• Debian OMSA 5.2 package   Sander Keemink
• PE2900 CentOS raid 1 success raid 5 fail   Bahadir Kiziltan
• PE2900 CentOS raid 1 success raid 5 fail   Bahadir Kiziltan
• SATA controller on Dell SC1435   Peter Kjellstrom
• RedHat ES and AS kernels   Peter Kjellstrom
• GCC compile options   Peter Kjellstrom
• RHEL 4 WS driver for a PE 1435sc?   Peter Kjellstrom
• Temperature monitoring with OpenIPMI on Poweredge x9xx   Peter Kjellstrom
• Latest Perc5E firmware and drivers...   Ken Kleiner
• Linux hosts on the MD3000 with a failover setup   Kristian T. Knudsen
• md 1000 & dell2950   Kristian T. Knudsen
• OMSA 5.1 with SNMP on a Debian system   Gunnar Krull
• Missing disk halts boot sequence   Bart van Kuik
• Missing disk halts boot sequence   Bart van Kuik
• Missing disk halts boot sequence   Bart van Kuik
• Missing disk halts boot sequence   Bart van Kuik
• yum meta-package for driver updates   Bart van Kuik
• Utility partition   Bart van Kuik
• Unable to mount sdb1 after upgrade to CentOS 4.5   Kevin Kwast
• Unable to mount sdb1 after upgrade to CentOS 4.5   Kevin Kwast
• Unable to mount sdb1 after upgrade to CentOS 4.5   Kevin Kwast
• up2date stuck using Dell yum repository   Tim Larson
• Call for input: customer contributed RPMS in the unofficial repository   Michael St. Laurent
• System failure light and RAID ?   Taneli Leppä
• About KIPMI0 process   Chris - Dell PowerEdge List
• About KIPMI0 process   Chris - PowerEdge Linux List
• About KIPMI0 process   Chris - PowerEdge Linux List
• About KIPMI0 process   Chris - PowerEdge Linux List
• CentOS 5.0 Final + OMSA 5.2 on PE 1750   J Longsford
• xen vs native on PE2950   Johan Loubser
• PowerEdge Ampere   Todd Lyons
• Help ! CentOS on PE2900   Todd Lyons
• alt+sysrq combinations on PE KVM switches   Todd Lyons
• Determine whether or not a DRAC5 is installed   Mike M
• Latest Perc5E firmware and drivers...   Mansell, Gary
• Has anyone sucessfully installed Ubuntu on a PE 2650   Mansell, Gary
• Sporadic drive problems on PE1950   Randy Martin
• Upgrading from 32bit to 64 bit OS on 2950   McDougall, Marshall (FSH)
• Upgrading from 32bit to 64 bit OS on 2950   McDougall, Marshall (FSH)
• Issue with srvadmin-deng RPM "Requires" for net-snmp   McKee, Shawn
• PE 860: Cannot boot from USB   Mi
• Errors configuring server to access Dell yum Repo   Craig Morris
• RAID 1 vs RAID 10   Ronan Mullally
• Older PowerEdge recommendations for an Inexpensive NAS?   Jack Murgia
• RHEL 4 WS driver for a PE 1435sc?   Jack Murgia
• Experience setting processor affinity with RHEL   John Murtari
• TCP/IP Offload Engine   Tom Z. Napierala
• Debian OMSA 5.2 package   Tom Z. Napierala
• SC440, SAS 5/i and RAID   Tom Z. Napierala
• CentOS 3 install error from repo   Jim Nelson
• CentOS 3 install error from repo   Jim Nelson
• Frustration   Jim Nelson
• Centos 5 / linux on poweredge 2400   Jim Nelson
• Frustration   Jim Nelson
• Hardware monitoring for OpenSUSE?   Jim Nelson
• SC440, SAS 5/i and RAID   Jim Nelson
• SC440, SAS 5/i and RAID   Jim Nelson
• Call for input: customer contributed RPMS in the unofficial repository   Jim Nelson
• ubuntu 7.04 Install cannot find hard drives, with 9k646 Raid card   Mark Newbegin
• Dell PE 1u rack servers   John Nietzsche
• OT: list sign off   John Nietzsche
• Problem building php 4.4.6 and apache 1.3.37 on RHEL 4   Kuba Ober
• RHEL4 U5 and NICs order/naming   Kuba Ober
• TCP/IP Offload Engine   Kuba Ober
• TCP/IP Offload Engine   Kuba Ober
• TCP/IP Offload Engine   Kuba Ober
• PowerEdge, CentOS and LTO2: Tape is extremely slow 2 to 4 MB/s   Kuba Ober
• SUU install problems   Kuba Ober
• Replacing failed disk with MegaCli   Kuba Ober
• Locking a chassis cover (P/N MF097, SC1425)   Kuba Ober
• Abysmal Tape Drive Performance on a 2850   Kuba Ober
• adding 300GB scsi drives to a PE2600 question   Kuba Ober
• Server locks during software mirror reconstruction   Kuba Ober
• Server locks during software mirror reconstruction   Kuba Ober
• Monitoring network traffic on a PE2950 (Onboard Broadcom Gigabit ctrl)   Kuba Ober
• 1855 won't see a full 16GB of RAM   Kuba Ober
• OMSA and ESX   Kuba Ober
• Firmware version is out of date   Kuba Ober
• System failure light and RAID ?   Kuba Ober
• Missing disk halts boot sequence   James Pattie
• Dell joins Novell deal ...   Rev. Jeffrey Paul
• srvadmin-deng   Nicky Peeters
• Graphing multi-core CPUs with MRTG   Matt Peterson
• Problems PXE booting Dell Poweredge 2550   Gregg Phillips
• Poweredge 2650 RHEL4 install PERC3D/I RAID disk errors   Tim Pickard
• Poweredge 2650 RHEL4 install PERC3D/I RAID disk errors   Tim Pickard
• PE:1855 - DSA via PXE   Carl Pickering
• 1855 - DSA via PXE [Scanned]   Carl Pickering
• 1855 - DSA via PXE [Scanned]   Carl Pickering
• srvadmin-install.sh on CentOS   Wayne Pinette
• PERC 3si manual   Marios Pittas
• PERC 3si manual   Marios Pittas
• GCC compile options   Howard Powell
• Perc 5/i Firmware updates....   Linux PowerEdge
• System failure light and RAID ?   Hannu Puhakka
• Locking a chassis cover (P/N MF097, SC1425)   RB
• Locking a chassis cover (P/N MF097, SC1425)   RB
• PE2950 and Linux kernel panic with PERC 5i   RB
• Weird fan behaviour on a 2950   RB
• vmotion between dual core 5160 and quad core X5355   RB
• About KIPMI0 process   RB
• About KIPMI0 process   RB
• Disabling automatic reconstruct on Perc5e   RB
• does an OptiPlex GX260 have any PCI Xpress or PCI-X slots?   RB
• Question on DRAC...   Rarach
• About KIPMI0 process   Chance Reschke
• About KIPMI0 process   Chance Reschke
• ipmitool bootdev pxe   Chance Reschke
• OMSA 5.2 on 64 bit (RHEL5) Dell PowerEdge SC440   Carlos Ribeiro
• Dell Issues for Red Hat Linux 9 1600.   Eric Rostetter
• DRAC/5 and STONITH   Eric Rostetter
• determining if two processors   Rudmann, Inc.
• Centos 5 / linux on poweredge 2400   Emanuel Salagean
• Centos 5 / linux on poweredge 2400   Emanuel Salagean
• Locking a chassis cover (P/N MF097, SC1425)   Bogart Salzberg
• Locking a chassis cover (P/N MF097, SC1425)   Bogart Salzberg
• Locking a chassis cover (P/N MF097, SC1425)   Bogart Salzberg
• PowerEdge 1400SC CENTOS Installer hangs at ISOLINUX 3.11 2005-09-02 Copyright...   Eduardo Sanchez
• RHEL5 and PERC 4 monitoring (PE1750)   Matthias Saou
• RHEL5 and PERC 4 monitoring (PE1750) (solved)   Matthias Saou
• RHEL5 and PERC 4 monitoring (PE1750) (solved)   Matthias Saou
• RHEL5 and PERC 4 monitoring (PE1750) (solved)   Matthias Saou
• RHEL4 U5 and NICs order/naming   Moritz Schüpp
• Frustration   Ben Scott
• Frustration   Ben Scott
• Unable to mount sdb1 after upgrade to CentOS 4.5   Ben Scott
• Weird fan behaviour on a 2950   Ben Scott
• Dell PE 1u rack servers   Brian A. Seklecki
• RHEL4 U5 and NICs order/naming   Sharpe, Sam J
• Fwd: RHEL on PE2950/CX300 - supported configuration?   Jim Shirley
• yum meta-package for driver updates   Jim Shirley
• shmmax: Starting dsm_sa_datamgr32d FAILED after kernel tune   Jim Shirley
• Installing OMSA on 6950 running Oracle Enterprise Linux (rebranded RHEL 4)   Jim Shirley
• attempt to access beyond end of device   Fred Skrotzki
• Perc 5/i Firmware updates....   Fred Skrotzki
• Perc 5/i Firmware updates....   Fred Skrotzki
• PE2900 CentOS raid 1 success raid 5 fail   Fred Skrotzki
• Weird fan behaviour on a 2950   Fred Skrotzki
• 1650 - clearing orange blinking alert   Fred Skrotzki
• 1855 won't see a full 16GB of RAM   Fred Skrotzki
• SUU install problems   Al Sparks
• SUU install problems   Al Sparks
• srvadmin-install.sh on CentOS   Al Sparks
• srvadmin-install.sh on CentOS   Al Sparks
• SNMP write request failed   Al Sparks
• Frustration   David Sparks
• Frustration   David Sparks
• Frustration   David Sparks
• Frustration   David Sparks
• RHN monitoring probe for PERC?   Ricardo Stella
• PowerEdge 1400SC CENTOS Installer hangs at ISOLINUX 3.112005-09-02 Copyright...   Sturgis, Grant
• Dell Repo Problem / Error   Sturgis, Grant
• Dell Repo Problem / Error   Sturgis, Grant
• Dell Repo Problem / Error   Sturgis, Grant
• Dell Repo Problem / Error   Sturgis, Grant
• Dell Repo Problem / Error   Sturgis, Grant
• Dell Repo Problem / Error   Sturgis, Grant
• Dell Repo Problem / Error   Sturgis, Grant
• dell 2650 and kernel 2.6.21   Rafal Suchowirski
• dell 2650 and kernel 2.6.21   Rafal Suchowirski
• dell token information   Steve Thompson
• Perl 5/E and 'import foreign configuration'   Steve Thompson
• attempt to access beyond end of device   David Titzer
• attempt to access beyond end of device   David Titzer
• OMSA reports VMware as the OS?   Rainer Traut
• RAID 1 vs RAID 10   Ries van Twisk
• Problem with giga-port on PowerEdge 2550   Herman Vega
• OMSA Install RHEL4, PE 6950   Peter Verhoeven
• OMSA Install RHEL4, PE 6950   Peter Verhoeven
• Installing OMSA on 6950 running Oracle Enterprise Linux (rebranded RHEL 4)   Peter Verhoeven
• Installing OMSA on 6950 running Oracle Enterprise Linux(rebranded RHEL 4)   Peter Verhoeven
• Firmware version is out of date   Peter Verhoeven
• Firmware version is out of date   Peter Verhoeven
• Poweredge 850 Preventive Battery Maintenance?   Adrian Walker
• drac 5 virtual media plugin   Mark Watts
• DRAC/5 and STONITH   Mark Watts
• DRAC/5 and STONITH   Mark Watts
• PE2950 : Updated Perc Firmware using SUU : now need to updatedriversbefore reboot...   Mark Watts
• Question on DRAC...   Mark Watts
• IPMI over LAN, which protocol version?   Celso K. Webber
• IPMI over LAN, which protocol version?   Celso K. Webber
• alt+sysrq combinations on PE KVM switches   Robert Wehner
• Linux-PowerEdge Digest, Vol 32, Issue 65   Robert Wehner
• PowerEdge, CentOS and LTO2: Tape is extremely slow 2 to 4 MB/s   Weichmann, Patrick
• Shrink RAID5?   Scott Wessels
• srvadmin-deng   Craig White
• 1650 - clearing orange blinking alert   Craig White
• srvadmin-racvnc and RHELv5   Craig White
• Pe 860 - 1950 - 2950 - 64 bit or 32 bit Linux distros?   Marcel White
• Availability and plans for upgrading to RHEL5?   Marcel White
• Installing OMSA on 6950 running Oracle Enterprise Linux   Marcel White
• firmware-tools package?   K. Reid Wightman
• RHN monitoring probe for PERC?   Reid Wightman
• RHN monitoring probe for PERC?   Reid Wightman
• firmware-tools package?   Reid Wightman
• firmware-tools package?   Reid Wightman
• firmware-tools package?   Reid Wightman
• firmware-tools package?   Reid Wightman
• firmware-tools package?   Reid Wightman
• funny question about perc3/di's   Reid Wightman
• RHEL5 and PERC 4 monitoring (PE1750)   Reid Wightman
• RHEL5 and PERC 4 monitoring (PE1750) (solved)   Reid Wightman
• openmanage timeout configuration?   Reid Wightman
• PE2550 Serial Ports not working   Adam Williams
• Dell Issues for Red Hat Linux 9 1600.   Adam Williams
• check to see if a drive has failed   Adam Williams
• Older PowerEdge recommendations for an Inexpensive NAS?   Adam Williams
• Help ! CentOS on PE2900   Adam Williams
• OPMN 5 failed to startup on DELL 2650 with Redhat AS 4.4   Adam Williams
• MegaCli   Adam Williams
• MegaCli   Adam Williams
• adding 300GB scsi drives to a PE2600 question   Adam Williams
• Centos 5 / linux on poweredge 2400   Adam Williams
• OT: list sign off   Adam Williams
• how to install FC3 onto a PowerEdge 2950 with perc5/i and sas drives?   Adam Williams
• OMSA says battery degraded on 4/DI   Adam Williams
• OMSA says battery degraded on 4/DI   Adam Williams
• OMSA says battery degraded on 4/DI   Adam Williams
• RedHat ES and AS kernels   Robert Wilson
• Debian OMSA 5.2 package   Rafał Woźniak
• bootstrap.cgi in Dell yum software repoHello, The file bootstrap.cgi is now used to add the repo and GPG key auto-magically to a client. Couple questions: 1. Is there a way to get the source script (for mirroring) similar to the way mirrors.pl-SOURCE is provided? 2. The output of the script says # If you wish to mirror the Dell yum repository, you need to: # --> ask me to redo these instructions, because I just made it a lot easier. :) Well ok. I'm asking :-). Thanks! Eric   Eric Yablonowitz
• mirroring hardware repository   Eric Yablonowitz
• bootstrap.cgi in Dell yum software repo   Eric Yablonowitz
• bootstrap.cgi in Dell yum software repo   Eric Yablonowitz
• yum firmware update for PERC and DRAC   Eric Yablonowitz
• yum firmware update for PERC and DRAC   Eric Yablonowitz
• yum meta-package for driver updates   Eric Yablonowitz
• yum meta-package for driver updates   Eric Yablonowitz
• yum meta-package for driver updates   Eric Yablonowitz
• yum firmware update for PERC and DRAC   Eric Yablonowitz
• yum firmware update for PERC and DRAC   Eric Yablonowitz
• yum firmware update for PERC and DRAC   Eric Yablonowitz
• Yum repo grief   Dimitri Yioulos
• Yum repo grief   Dimitri Yioulos
• Yum repo grief   Dimitri Yioulos
• yum meta-package for driver updates   Dimitri Yioulos
• Dell Repo Problem / Error   Dimitri Yioulos
• OMSA says battery degraded on 4/DI   Dimitri Yioulos
• PowerEdge Ampere   Giorgio Zarrelli
• Pe 860 - 1950 - 2950 - 64 bit or 32 bit Linux distros?   Giorgio Zarrelli
• Pe 860 - 1950 - 2950 - 64 bit or 32 bit Linux distros?   Giorgio Zarrelli
• GCC compile options   Giorgio Zarrelli
• Asset Tag under GNU/Linux   Giorgio Zarrelli
• Availability and plans for upgrading to RHEL5?   Zembower, Kevin
• how to install FC3 onto a PowerEdge 2950 with perc5/i and sas drives?   Fred Ziegler
• PE 860: Cannot boot from USB   arne
• OMSA Reports & SNMP   madhu babu
• Question on DRAC...   PBrunnen at bccnetworks.net
• Question on DRAC...   PBrunnen at bccnetworks.net
• Anyone have any setup instructions for using RUG and SLES9 with the YUM Repo?   Dennis_Helleur at ca1.uscourts.gov
• OMSA 5.1 with SNMP on a Debian system   chiel
• OMSA 5.1 with SNMP on a Debian system   chiel
• OMSA 5.1 with SNMP on a Debian system   chiel
• Degraded array, upgrade firmware   chiel
• Degraded array, upgrade firmware   chiel
• Degraded array, upgrade firmware   chiel
• How to create the /etc/modprobe.conf file from scratch   mark foster
• Hardware monitoring for OpenSUSE?   kevin at indigospring.co.uk
• Hardware monitoring for OpenSUSE?   kevin at indigospring.co.uk
• Asset Tag under GNU/Linux   peterd at lexmark.com
• Disable SMI on new BMC?   BSmith at lyrix.com
• Perl 5/E and 'import foreign configuration'   BSmith at lyrix.com
• OPMN 5 failed to startup on DELL 2650 with Redhat AS 4.4   mcclnx mcc
• OPMN 5 failed to startup on DELL 2650 with Redhat AS 4.4   mcclnx mcc
• where can I download OPMN 5.2 for LINUX   mcclnx mcc
• Re: Linux-PowerEdge Digest, Vol 32, Issue 67   michalwd1979
• PE2950 and Linux kernel panic with PERC 5i   percipio
• PE2950 and Linux kernel panic with PERC 5i   percipio
• PE2950 and Linux kernel panic with PERC 5i   percipio
• does an OptiPlex GX260 have any PCI Xpress or PCI-X slots?   dell_list at socalweb.com
• RAID 1 vs RAID 10   patricko at staff.singnet.com.sg
• yum repo status update   seth vidal
• TCP/IP Offload Engine   wolf2k5
• RHEL4 U5 and NICs order/naming   wolf2k5
• RHEL4 U5 and NICs order/naming   wolf2k5
• How to create the /etc/modprobe.conf file from scratch   wolf2k5
• OMSA and ESX   wolf2k5
• About KIPMI0 process   hai wu
• About KIPMI0 process   hai wu
• About KIPMI0 process   hai wu

Last message date: Thu May 31 23:17:21 CST 2007
Archived on: Thu May 31 23:17:34 CST 2007

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...