dell token information
Michael E Brown
Michael_E_Brown at dell.com
Tue May 8 06:05:05 CDT 2007
On Tue, May 08, 2007 at 12:55:58AM -0500, W Bauske wrote:
>
> Thanks Michael,
>
> Will check the test system tomorrow and see how the change went.
> Question though about conflicting tokens. If I decide to turn off
> WoL, do I just set 0x0055 and 0x006d will automatically be deactivated??
Yup. They are like radio buttons. When you enable one, the related ones
are automatically disabled.
--
Michael
>
> Wes Bauske
>
> Michael E Brown wrote:
> >On Mon, May 07, 2007 at 01:17:25AM -0500, Wes Bauske wrote:
> >
> >
> >Ok, everybody. Pay attention... Sekret stuff below. This is a pain in
> >the --- to look up and write, so I'm probably only going to do this
> >once. Only ask for other tokens if they are not on this list.
> >
> >this is the token listing. use with activateCmosToken or tokenCtl
> >binaries.
> >
> >Wes,
> > What you need is below. Search for 'wake'
> >--
> >Michael
> >
> >
> >
> >>Dump of all Dell-specific CMOS Tokens from table 0xD4:
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0042 Location 0x11 AND(fe) OR(1) BITFIELD: 1
> >
> >
> >Num lock enable
> >
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0043 Location 0x11 AND(fe) OR(0) BITFIELD: 0
> >
> >
> >num lock disable
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x000f Location 0x25 AND(fc) OR(0) BITFIELD: 0
> >
> >
> >serial port 1 disable
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0010 Location 0x25 AND(fc) OR(1) BITFIELD: 1
> >
> >
> >serial port 1 auto
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0011 Location 0x25 AND(fc) OR(2) BITFIELD: 0
> >
> >
> >serial port 1 com1
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0012 Location 0x25 AND(fc) OR(3) BITFIELD: 0
> >
> >
> >serial port 1 com3
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0000 Location 0x25 AND(f3) OR(0) BITFIELD: 1
> >
> >
> >null
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0000 Location 0x25 AND(f3) OR(4) BITFIELD: 0
> >
> >
> >null
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0000 Location 0x25 AND(f3) OR(8) BITFIELD: 0
> >
> >
> >null
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0000 Location 0x25 AND(f3) OR(c) BITFIELD: 0
> >
> >
> >null
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0007 Location 0x23 AND(8f) OR(0) BITFIELD: 0
> >
> >
> >parallel port disable
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0008 Location 0x23 AND(f3) OR(0) BITFIELD: 1
> >
> >
> >parallel port lpt1
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0009 Location 0x23 AND(f3) OR(4) BITFIELD: 0
> >
> >
> >parallel port lpt2
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x000a Location 0x23 AND(f3) OR(8) BITFIELD: 0
> >
> >
> >parallel port lpt3
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x000b Location 0x23 AND(8f) OR(10) BITFIELD: 0
> >
> >
> >parallel port mode at
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x000c Location 0x23 AND(8f) OR(20) BITFIELD: 1
> >
> >
> >parallel port mode ps2
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x000e Location 0x23 AND(8f) OR(30) BITFIELD: 0
> >
> >
> >parallel port mode epp
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x000d Location 0x23 AND(8c) OR(40) BITFIELD: 0
> >
> >
> >parallel port mode ecp
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x00a6 Location 0x23 AND(8c) OR(41) BITFIELD: 0
> >
> >
> >parallel port mode ecp, dma1
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x00a7 Location 0x23 AND(8c) OR(42) BITFIELD: 0
> >
> >
> >parallel port mode ecp, dma3
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0105 Location 0x22 AND(fd) OR(2) BITFIELD: 0
> >
> >
> >Standby state s1 -- The system is placed into the ACPI S1 sleeping
> >state when the system enters Standby.
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0106 Location 0x22 AND(fd) OR(0) BITFIELD: 1
> >
> >
> >Standby state s3 -- The system is placed into the ACPI S3 (save-to-RAM)
> >sleeping state when the system enters Standby.
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x008c Location 0x22 AND(fe) OR(0) BITFIELD: 1
> >
> >
> >usb controller enable
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x008d Location 0x22 AND(fe) OR(1) BITFIELD: 0
> >
> >
> >usb controller disable
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0109 Location 0x25 AND(3f) OR(80) BITFIELD: 0
> >
> >
> >usb emulation on, no usb boot
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x00a1 Location 0x26 AND(f3) OR(0) BITFIELD: 1
> >
> >
> >ac power recovery -- off
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x00a2 Location 0x26 AND(f3) OR(8) BITFIELD: 0
> >
> >
> >ac power recovery -- last
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x00a3 Location 0x26 AND(f3) OR(4) BITFIELD: 0
> >
> >
> >ac power recovery -- on
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x009f Location 0x26 AND(fd) OR(2) BITFIELD: 0
> >
> >
> >password status lock -- locked
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x00a0 Location 0x26 AND(fd) OR(0) BITFIELD: 1
> >
> >
> >password status lock -- unlocked
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x009d Location 0x11 AND(fb) OR(4) BITFIELD: 1
> >
> >
> >keyboard error reporting -- enabled
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x009e Location 0x11 AND(fb) OR(0) BITFIELD: 0
> >
> >
> >keyboard error reporting -- disabled
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0154 Location 0x23 AND(7f) OR(0) BITFIELD: 0
> >
> >
> >SERR DMI Message - off
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0155 Location 0x23 AND(7f) OR(80) BITFIELD: 1
> >
> >
> >SERR DMI Message - on
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x005c Location 0x78 AND(bf) OR(40) BITFIELD: 0
> >
> >
> >use dellBiosUpdate -- do not manually set
> >
> >remote bios update -- enable
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x005d Location 0x78 AND(bf) OR(0) BITFIELD: 1
> >
> >
> >use dellBiosUpdate -- do not manually set
> >
> >remote bios update -- disable
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x8004 Location 0x78 AND(f5) OR(a) BITFIELD: 0
> >
> >
> >power off - requested -- A system power-off has been requested by the
> >hardware (i.e. a user has pressed the system power-off button) or the
> >management software. If the system-management instrumentation has set
> >the Management Driver|Present attribute (without legacy masking), the
> >management code polls this attribute periodically to provide an orderly
> >system shutdown when a system power-off is requested. System-management
> >software writes this token prior to resetting the system to cause the
> >system BIOS to force a system power-down. This feature is used in
> >Windows NT 4.0 to cause the system to power-off (since an NT shutdown
> >simply returns the system to the logon window).
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0xa001 Location 0x78 AND(f5) OR(0) BITFIELD: 1
> >
> >
> ><note: possibly misdocumented>
> >
> >chassis intrusion - sequence complete -- The system-management
> >instrumentation writes this attribute once the operating-system shutdown
> >has been initiated to instruct the BIOS to complete the
> >previously-requested system power-off sequence.
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0093 Location 0x7b AND(7f) OR(80) BITFIELD: 0
> >
> >
> >force pxe on next boot - enabled
> >
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x0094 Location 0x7b AND(7f) OR(0) BITFIELD: 1
> >
> >
> >force pxe on next boot - disabled
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x008a Location 0x37 AND(df) OR(20) BITFIELD: 0
> >
> >
> >limit system memory - enabled (OS Install mode)
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0x008b Location 0x37 AND(df) OR(0) BITFIELD: 1
> >
> >
> >limit system memory - disabled
> >
> >
> >>DMI type 0xd4 Handle 0xd400 Index Port 0x70 Data Port 0x71 Type
> >>0xc003 Location 0x67 STRING Length 05 value(??? a)
> >
> >
> >service tag
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x002d Location 0x59 AND(fc) OR(2) BITFIELD: 1
> >
> >
> >embedded nic 1 -- enable with pxe
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x002e Location 0x59 AND(fc) OR(0) BITFIELD: 0
> >
> >
> >embedded nic 1 -- disable
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x006e Location 0x59 AND(fc) OR(1) BITFIELD: 0
> >
> >
> >embedded nic 1 -- enable with boot support
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0127 Location 0x59 AND(fc) OR(3) BITFIELD: 0
> >
> >
> >embedded nic 1 -- enable with rpl support
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0028 Location 0x59 AND(3f) OR(0) BITFIELD: 1
> >
> >
> >--> USE wakeupCtl to set these
> >
> >auto on - disable
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0029 Location 0x59 AND(3f) OR(40) BITFIELD: 0
> >
> >
> >--> USE wakeupCtl to set these
> >
> >auto on - every day
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x002a Location 0x59 AND(3f) OR(80) BITFIELD: 0
> >
> >
> >--> USE wakeupCtl to set these
> >
> >auto on - weekdays
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x002b Location 0x5a STRING Length 01 value()
> >
> >
> >--> USE wakeupCtl to set these
> >
> >auto-on HOUR -
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x002c Location 0x5b STRING Length 01 value()
> >
> >
> >--> USE wakeupCtl to set these
> >
> >auto-on MINUTE
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0055 Location 0x59 AND(f3) OR(0) BITFIELD: 1
> >
> >
> >Wake on lan disabled
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x006d Location 0x59 AND(f3) OR(4) BITFIELD: 0
> >
> >
> >wake on lan enabled
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x008e Location 0x59 AND(f3) OR(8) BITFIELD: 0
> >
> >
> >wake-on-lan boot override enabled -- When the system powers on due to a
> >Wake-on-LAN event, the NIC boot-ROM is automatically given the highest
> >boot priority, pre-pending the PXE boot-ROM to the systemÔÇÖs current
> >boot sequence. If the system powers on due to some other event, this
> >selection does not influence the boot sequence.
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x008f Location 0x59 AND(f3) OR(0) BITFIELD: 1
> >
> >
> >wake-on-lan boot override disabled
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0000 Location 0x55 AND(fb) OR(4) BITFIELD: 1
> >
> >
> >null
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0000 Location 0x55 AND(fb) OR(0) BITFIELD: 0
> >
> >
> >null
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0019 Location 0x55 AND(e7) OR(0) BITFIELD: 1
> >
> >
> >built-in floppy disable
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x001a Location 0x55 AND(e7) OR(8) BITFIELD: 0
> >
> >
> >built-in floppy auto
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x001b Location 0x55 AND(e7) OR(10) BITFIELD: 0
> >
> >
> >built-in floppy read-only
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0023 Location 0x55 AND(7f) OR(0) BITFIELD: 0
> >
> >
> >sound device disable
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0022 Location 0x55 AND(7f) OR(80) BITFIELD: 1
> >
> >
> >sound device enable
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x00f5 Location 0x58 AND(bf) OR(40) BITFIELD: 0
> >
> >
> >low power mode enable - The system will go into lowest-Power Off mode in
> >S4 and S5, turning off as much of the power-consuming circuitry as
> >required, to attempt to meet 1W power limit. This may disable things
> >like PME, USB power, etc.
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x00f6 Location 0x58 AND(bf) OR(0) BITFIELD: 1
> >
> >
> >low power mode disable
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x00eb Location 0x55 AND(fe) OR(0) BITFIELD: 0
> >
> >
> >POST test - thorough
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x00ea Location 0x55 AND(fe) OR(1) BITFIELD: 1
> >
> >
> >post test minimal
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0101 Location 0x51 AND(3f) OR(0) BITFIELD: 1
> >
> >
> >hard disc acoustic mode - bypass
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0102 Location 0x51 AND(3f) OR(40) BITFIELD: 0
> >
> >
> >hard disc acoustic mode - quiet
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0103 Location 0x51 AND(3f) OR(80) BITFIELD: 0
> >
> >
> >hard disc acoustic mode - suggested
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0104 Location 0x51 AND(3f) OR(c0) BITFIELD: 0
> >
> >
> >hard disc acoustic mode - performance
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0140 Location 0x54 AND(ef) OR(0) BITFIELD: 0
> >
> >
> >cpu xd support - off -- When Enabled, Intel CPUs that support the
> >eXecute Disable (XD) feature will report the support to the operating
> >system. If the operating system supports this extended paging mechanism,
> >it will provide some protection against software viruses that exploit
> >buffer overflows.
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0141 Location 0x54 AND(ef) OR(10) BITFIELD: 1
> >
> >
> >cpu xd support - enabled
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0142 Location 0x54 AND(f7) OR(0) BITFIELD: 1
> >
> >
> >smartcard reader off
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0143 Location 0x54 AND(f7) OR(8) BITFIELD: 0
> >
> >
> >smartcard reader enabled
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x014a Location 0x54 AND(fb) OR(0) BITFIELD: 1
> >
> >
> >cpu virtualization disabled - This feature will allow the users to
> >disable the VT technology in applicable CPUs. If disabled, the VT
> >feature is unusable in any OS.
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x014b Location 0x54 AND(fb) OR(4) BITFIELD: 0
> >
> >
> >cpu virtualization enabled
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x014c Location 0x53 AND(7f) OR(0) BITFIELD: 0
> >
> >
> >multiple cpu cores - disable
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x014d Location 0x53 AND(7f) OR(80) BITFIELD: 1
> >
> >
> >multiple cpu cores - enable
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0168 Location 0x56 AND(bf) OR(0) BITFIELD: 1
> >
> >
> >limit cpuid value -- off
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x0169 Location 0x56 AND(bf) OR(40) BITFIELD: 0
> >
> >
> >limit cpuid value -- on
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x01c1 Location 0x4f AND(fc) OR(0) BITFIELD: 1
> >
> >
> >asf -- off
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x01c3 Location 0x4f AND(fc) OR(1) BITFIELD: 0
> >
> >
> >asf - alert only
> >
> >
> >>DMI type 0xd4 Handle 0xd401 Index Port 0x70 Data Port 0x71 Type
> >>0x01c2 Location 0x4f AND(fc) OR(2) BITFIELD: 0
> >
> >
> >asf - on
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x012d Location 0x21 AND(fe) OR(1) BITFIELD: 0
> >
> >
> >energy star logo enable
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x012e Location 0x21 AND(fe) OR(0) BITFIELD: 1
> >
> >
> >energy star logo disable
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x0097 Location 0x22 AND(fb) OR(0) BITFIELD: 1
> >
> >
> >pci slots enabled
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x0098 Location 0x22 AND(fb) OR(4) BITFIELD: 0
> >
> >
> >pci slots disabled
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x0090 Location 0x11 AND(cf) OR(0) BITFIELD: 0
> >
> >
> >chassis intrusion reporting enabled
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x0091 Location 0x11 AND(cf) OR(20) BITFIELD: 0
> >
> >
> >chassis intrusion reporting disabled
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x0092 Location 0x11 AND(cf) OR(10) BITFIELD: 1
> >
> >
> >chassis intrusion reporting enabled, silent
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x00e2 Location 0x27 AND(7f) OR(0) BITFIELD: 1
> >
> >
> >f2 post display - enabled
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x00e3 Location 0x27 AND(7f) OR(80) BITFIELD: 0
> >
> >
> >f2 post display - disabled
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x00e4 Location 0x27 AND(bf) OR(0) BITFIELD: 1
> >
> >
> >F12 post display - enabled
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x00e5 Location 0x27 AND(bf) OR(40) BITFIELD: 0
> >
> >
> >F12 post display - disabled
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x00d1 Location 0x22 AND(7f) OR(80) BITFIELD: 1
> >
> >
> >cpu hyperthreading (HT) - enabled
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x00d2 Location 0x22 AND(7f) OR(0) BITFIELD: 0
> >
> >
> >cpu hyperthreading (HT) - disabled
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x013e Location 0x22 AND(bf) OR(40) BITFIELD: 0
> >
> >
> >memory remapping on -- Memory remapping relocates memory space behind
> >PCI hole to the space above 4G. With this feature enabled, OS can use
> >the relocated memory as main memory.
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x013f Location 0x22 AND(bf) OR(0) BITFIELD: 1
> >
> >
> >memory remapping off -- Memory remapping relocates memory space behind
> >PCI hole to the space above 4G. With this feature disabled, memory
> >space behind PCI hole is not relocated.
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x012b Location 0x11 AND(7f) OR(80) BITFIELD: 0
> >
> >
> >smart errors enable -- disable hd smart errors on POST
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x012c Location 0x11 AND(7f) OR(0) BITFIELD: 1
> >
> >
> >smart errors disable
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x014e Location 0x65 AND(cf) OR(0) BITFIELD: 0
> >
> >
> >front usb ports disabled
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x014f Location 0x65 AND(cf) OR(10) BITFIELD: 1
> >
> >
> >front usb ports enabled
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x01d4 Location 0x65 AND(f3) OR(0) BITFIELD: 0
> >
> >
> >No idea. Not documented in my version of the doc.
> >to reverse engineer, change something in BIOS not already listed on this
> >email, and see if one of these changes... :)
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x01d5 Location 0x65 AND(f3) OR(4) BITFIELD: 1
> >
> >
> >No idea. Not documented in my version of the doc.
> >to reverse engineer, change something in BIOS not already listed on this
> >email, and see if one of these changes... :)
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x01d2 Location 0x65 AND(fc) OR(0) BITFIELD: 0
> >
> >
> >No idea. Not documented in my version of the doc.
> >to reverse engineer, change something in BIOS not already listed on this
> >email, and see if one of these changes... :)
> >
> >
> >>DMI type 0xd4 Handle 0xd402 Index Port 0x70 Data Port 0x71 Type
> >>0x01d3 Location 0x65 AND(fc) OR(1) BITFIELD: 1
> >
> >
> >No idea. Not documented in my version of the doc.
> >to reverse engineer, change something in BIOS not already listed on this
> >email, and see if one of these changes... :)
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x0117 Location 0x52 AND(fe) OR(0) BITFIELD: 0
> >
> >
> >serial ata drive 0 -- off
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x0118 Location 0x52 AND(fe) OR(1) BITFIELD: 1
> >
> >
> >serial ata drive 0 -- auto
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x0119 Location 0x52 AND(fb) OR(0) BITFIELD: 1
> >
> >
> >serial ata drive 1 -- off
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x011a Location 0x52 AND(fb) OR(4) BITFIELD: 0
> >
> >
> >serial ata drive 1 -- auto
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x011b Location 0x52 AND(fd) OR(0) BITFIELD: 1
> >
> >
> >serial ata drive 2 -- off
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x011c Location 0x52 AND(fd) OR(2) BITFIELD: 0
> >
> >
> >serial ata drive 2 -- auto
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x011d Location 0x52 AND(f7) OR(0) BITFIELD: 1
> >
> >
> >serial ata drive 3 -- off
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x011e Location 0x52 AND(f7) OR(8) BITFIELD: 0
> >
> >
> >serial ata drive 3 -- auto
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x011f Location 0x52 AND(ef) OR(0) BITFIELD: 1
> >
> >
> >serial ata drive 4 -- off
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x0120 Location 0x52 AND(ef) OR(10) BITFIELD: 0
> >
> >
> >serial ata drive 4 -- auto
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x0121 Location 0x52 AND(bf) OR(0) BITFIELD: 1
> >
> >
> >serial ata drive 5 -- off
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x0122 Location 0x52 AND(bf) OR(40) BITFIELD: 0
> >
> >
> >serial ata drive 5 -- auto
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x0000 Location 0x59 AND(df) OR(20) BITFIELD: 0
> >
> >
> >null
> >
> >
> >>DMI type 0xd4 Handle 0xd403 Index Port 0x70 Data Port 0x71 Type
> >>0x0000 Location 0x59 AND(df) OR(0) BITFIELD: 1
> >
> >
> >null
> >
> >
> >>DMI type 0xda Handle 0xda00 CmdIO Port 0x00b2 CmdIO Code 0x17 Type
> >>0x8000 Location 0x8000 value 0001
> >
> >
> >chassis intrusion -- tripped
> >
> >
> >>DMI type 0xda Handle 0xda00 CmdIO Port 0x00b2 CmdIO Code 0x17 Type
> >>0x8002 Location 0x8002 value 0001
> >
> >
> >chassis intrusion -- door open -- current door status
> >
> >
> >>DMI type 0xda Handle 0xda00 CmdIO Port 0x00b2 CmdIO Code 0x17 Type
> >>0xa000 Location 0xa000 value 0001
> >
> >
> >chassis intrusion trip reset
> >
> >
> >>DMI type 0xda Handle 0xda00 CmdIO Port 0x00b2 CmdIO Code 0x17 Type
> >>0x0058 Location 0x0058 value 0001
> >
> >
> >management driver - present -- The system-management instrumentation
> >sets this attribute when it loads to instruct that BIOS that
> >operating-system level software is handling any out-of-range management
> >condition ÔÇö if a critical threshold is passed, the driver takes
> >responsibility for shutting down the operating system and powering-off
> >the system. The instrumentation is responsible for de-registering
> >itself via the Absent attribute when it unloads.
> >
> >
> >>DMI type 0xda Handle 0xda00 CmdIO Port 0x00b2 CmdIO Code 0x17 Type
> >>0x0059 Location 0x0059 value 0001
> >
> >
> >management driver - absent -- This attribute indicates to the system BIOS
> >that any system-management monitoring is its responsibility. If an
> >out-of-range management condition occurs in the system, the BIOS powers
> >off the system to prevent hardware damage.
> >Implementation Note: To maintain compatibility with Dell OpenManage
> >Client, a BIOS that implements of this token via an Indexed I/O access
> >method must ensure that an AND-mask of 0xFB and an OR-value of 0x00
> >maintains the ÔÇ£absentÔÇØ status ÔÇö i.e. the status is in bit 2
> >of the indexed I/O location.
> >
> >
> >>DMI type 0xda Handle 0xda00 CmdIO Port 0x00b2 CmdIO Code 0x17 Type
> >>0x0175 Location 0x0175 value 0001
> >
> >
> >Dont touch this token. Trust me on this.
> >
> >It is a write-once-permanent token. If you touch it, it will be
> >permanently and forever enabled.
> >
> >
> >>DMI type 0xda Handle 0xda00 CmdIO Port 0x00b2 CmdIO Code 0x17 Type
> >>0x0176 Location 0x0176 value 0001
> >
> >
> >Dont touch this token. Trust me on this.
> >
> >It is a write-once-permanent token. If you touch it, it will be
> >permanently and forever enabled.
> >
> >
> >>DMI type 0xda Handle 0xda00 CmdIO Port 0x00b2 CmdIO Code 0x17 Type
> >>0x8005 Location 0x8005 value 0001
> >
> >
> >system check -- ok
> >
> >
> >>DMI type 0xda Handle 0xda01 CmdIO Port 0x00b2 CmdIO Code 0x17 Type
> >>0xf510 Location 0xf510 value 0000
> >
> >
> >probe -- see libsmbios probes unsupported binary
> >
> >
> >>DMI type 0xda Handle 0xda01 CmdIO Port 0x00b2 CmdIO Code 0x17 Type
> >>0xf511 Location 0xf511 value 0000
> >
> >
> >probe -- see libsmbios probes unsupported binary
> >
> >
> >>DMI type 0xda Handle 0xda01 CmdIO Port 0x00b2 CmdIO Code 0x17 Type
> >>0xf512 Location 0xf512 value 0000
> >
> >
> >probe -- see libsmbios probes unsupported binary
> >
> >
> >
> >
> >
> >
> >>>># # turn on wake on lan for onboard LAN (mutually exclusive with
> >>>>0x0055/0x0056):
> >>>># activateCmosToken 0x0057
> >>>>
> >>>># # turn on wake on lan for add-in nic (mutually exclusive with
> >>>>0x0057/0x0055):
> >>>># activateCmosToken 0x0056
> >>>>
> >>>># # turn off wake on lan:
> >>>># activateCmosToken 0x0055
> >>>>
> >>>># # on laptops with built-in wireless
> >>>># # turns on wake on lan over LAN or WLAN
> >>>># activateCmosToken 0x0198
> >>>>
> >>>>--
> >>>>Michael
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >
> >
>
More information about the Linux-PowerEdge
mailing list