check to see if a drive has failed

[Patrick_Boyd at Dell.com]

You can also use the SNMP components of OMSA.

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Adam Williams
Sent: Thursday, May 03, 2007 10:28 AM
To: linux-poweredge-Lists
Subject: check to see if a drive has failed

I have several PE servers w/ OMSA installed in outlying locations.  I'd 
like to have the servers let me know if one of the drives has failed in 
the RAID5 in each server.  I know I can check them manually through the 
https://server:1311 interface, but I'd like to automate the process.  I 
was thinking of running a daily cron and having it email me the output 
from "omreport storage vdisk" and look at the Status Line.  I'm assuming

if a drive failed the status line would change the degraded?  Are there 
other/better solutions out there?

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq