Fwd: RHEL on PE2950/CX300 - supported configuration?

[Jim Shirley]

Here is the link to the 33.5 Meg EMC hardware support matrix (look at next 
line) -> http://www.emc.com/interoperability/matrices/EMCSupportMatrix.pdf





Matthew Geier <matthew at acfr.usyd.edu.au> 
Sent by: linux-poweredge-bounces at dell.com
04/30/2007 06:56 PM

To
Shannon Skerritt <shannon at thousandhillservices.com>, 
linux-poweredge at dell.com
cc

Subject
Re: Fwd: RHEL on PE2950/CX300 - supported configuration?






Shannon Skerritt wrote:
> 
[http://www1.euro.dell.com/content/products/productdetails.aspx/pvaul_2950?c=uk&cs=RC1050264&l=en&s=lca]
>
> 
[http://www1.euro.dell.com/content/products/productdetails.aspx/pvaul_cx300?c=uk&cs=RC1050264&l=en&s=lca]
>
> seem to imply this is a supported configuration.
>
>
> 
 Dunno about 2950's, but i've installed a 4x1850 mirrored servers (2 x 2
hot standbys), QLogic HBAs, a CX300 and two switches and the entire
bundle runs Redhat Cluster Suite and is considered a supported
configuration by all vendors involved.
 EMC supply host agents and 'PowerPath' for Redhat and validate two
Redhat compabable HBAs.
 I didn't use PowerPath in the above, the Redhat 'multipath' was
suitable for the redundancy I required.



 I don't imagine the 2950 would be any different. EMC have a big support
matrix on their web site somewhere.

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20070501/3ced1d0c/attachment.htm