2950 - PERC5 - 'Disk Removed'

[Patrick_Boyd at Dell.com]

And do you get any alert in OMSA about the disk going to removed or
missing or something?
If the OMSA Alert log doesn't contain anything then a copy of the
controller log would be helpful.
(omconfig storage controller action=exportlog controller=0)

-----Original Message-----
From: Tom Brown [mailto:tom at ng23.net] 
Sent: Tuesday, March 27, 2007 3:11 PM
To: Boyd, Patrick
Cc: Brown, Michael E; linux-poweredge-Lists
Subject: Re: 2950 - PERC5 - 'Disk Removed'


> That actually wouldn't cause the drive to go removed. Sounds like a
> possible Bad Phy problem. Are you getting any alerts in OMSA around
the
> time that the drive exhibits this behavior?

thanks for all reply's on this, both on and off list.

Nothing in OMSA about this apart from when the disk goes awol and 
nothing smart related. Details of the disk in question after a rebuild 
below but again nothing untoward.

ID                        : 0:0:3
Status                    : Ok
Name                      : Array Disk 0:0:3
State                     : Online
Failure Predicted         : No
Progress                  : Not Applicable
Type                      : SAS
Capacity                  : 278.88 GB (299439751168 bytes)
Used RAID Disk Space      : 278.88 GB (299439751168 bytes)
Available RAID Disk Space : 0.00 GB (0 bytes)
Hot Spare                 : No
Vendor ID                 : DELL
Product ID                : ATLAS10K5_300SAS
Revision                  : BP00
Serial No.                : J80FV71K
Negotiated Speed          : Not Available
Capable Speed             : Not Available
Manufacture Day           : 01
Manufacture Week          : 29
Manufacture Year          : 2006
SAS Address               : 50010B90002135EE