2950 remote access howto?

[Christof Haerens]

Duncan Hill wrote:
> On Wed, March 21, 2007 13:40, Christof Haerens wrote:
>
>   
>> I'm currently not at the machine. The machine is down (put power is
>> connected). I can ping the ip address I gave to the remote access. But
>> ipmitool (from OpenIPMI-Tools) and racadm (from dell) both fails with
>> message they can't connect. A telnet to the ip on port 623 (which should
>> be the default ipmi port) also fails. I haven't tried all this when the
>>     
>
> If memory serves, IPMI is UDP, not TCP, so telnet will fail.
>
> ipmitool -l lan -Uroot -a -H 192.168.0.222 power reset
>
> is what I use to reset power via ipmitool - the password is what you set.
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>   


# ipmitool -l lan -Uroot -a -H 192.168.3.226 power reset
Password: 
Error: Unable to establish LAN session
ipmi_lan_send_cmd failed to open intf
Unable to set Chassis Power Control to Reset
#
# ping 192.168.3.226
PING 192.168.3.226 (192.168.3.226) 56(84) bytes of data.
64 bytes from 192.168.3.226: icmp_seq=1 ttl=128 time=34.5 ms
64 bytes from 192.168.3.226: icmp_seq=2 ttl=128 time=34.0 ms


Regards
Christof

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20070321/00cf894c/attachment.htm