Change boot order of 1955 trick??

[Brent_Clements at Dell.com]

The old 1955 blades used to allow you to change the boot order from hard drive to pxe by:
 
1. Powering off blade
2. Remove hard drive
3. power on blade and let system boot until pxe fires up
4. Power down blade
5. Re-insert hard drive
6. power on blade and voila, pxe boot is still the first choice to boot.
 
The latest 1955 blade revision doesn't seem to have this "feature". 
 
Does anyone know another trick to force pxe boot so that I don't need to press F12 to boot from pxe?
 
Thanks,
Brent C.

________________________________

From: linux-poweredge-bounces at dell.com on behalf of Frank Ch. Eigler
Sent: Tue 3/20/2007 1:41 PM
To: Brown, Michael E
Cc: linux-poweredge-Lists
Subject: Re: Problem upgrading RHEL3ES : firmware-addon-dell & firmware-tools=> requires python-abi = 2.2



Hi -

On Tue, Mar 20, 2007 at 01:38:16PM -0500, Michael E Brown wrote:

> Ok, I assumed that because RHEL3 was so similar to FC3, that I
> should follow the FC3 guidelines for RHEL3. [...]

The actual similarity relationships are closer to
RHEL3 ~ FC4
RHEL4 ~ FC5
RHEL5 ~ FC6

- FChE

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq