kernel module for 2950 sata raid?

[eclark]

Well, I did find a copy of megaraid_sas.c/.h from their site after unpacking 
the rpm with cpio. However, I get this.

drivers/scsi/megaraid_sas.c:#include <linux/compat.h>
drivers/scsi/megaraid_sas.c:#include <linux/mutex.h>
drivers/scsi/megaraid_sas.c:#include <scsi/scsi_cmnd.h>
drivers/scsi/megaraid_sas.c:#include <scsi/scsi_device.h>

None of these listed are actually in the 2.4.34 mainline. Are these all just 
patched in, and if so, where can I get these includes?

 

On Friday 02 March 2007 11:15 am, eclark wrote:
> Whats the equivalent to that for a 24 kernel? There is no megaraid_sas for
> 24 that I see.
>
> On Friday 02 March 2007 11:11 am, Marnix Werners wrote:
> > my 1950 has a PERC5i controller and needs MEGARAID_SAS, that worked for
> > me with kernel 2.6.18
> >
> > regards,
> >
> > Marnix.
> >
> > 2007/3/2, eclark <eclark at alabanza.com>:
> > > I just built a kernel (2.4.34.1) for a 2950 we just got in. However, it
> > > seems
> > > the kernel does not detect the drive. The kernel was built with
> > > megaraid2. Is
> > > this the appropriate module for the sata raid controller that comes
> > > with the
> > > 2950s? Its a perc5e-something.
> > >
> > > _______________________________________________
> > > Linux-PowerEdge mailing list
> > > Linux-PowerEdge at dell.com
> > > http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> > > Please read the FAQ at http://lists.us.dell.com/faq
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq