Got problem with PE 2850

Bart van Kuik linux-poweredge at vankuik.nl
Fri Jun 29 14:04:42 CDT 2007


Madhu,

Some additional questions; what's your Linux distribution and kernel
version? Is it a vendor supplied kernel or vanilla kernel?

I assume it's a harddisk that's on /dev/hdf. Can you dump SMART output on
the drive? Use something like:

  # smartctl /dev/hdf

Also, is it in a RAID array?

Bart

> From: "madhu babu" <winmails at gmail.com>
> Subject: Got problem with PE 2850
> To: linux-poweredge <linux-poweredge at dell.com>
> Message-ID:
> 	<e8418d310706290821m1beb17daq917e4089080faf70 at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi,
>
> We are using dell PE2850 for the past one year ,but suddenly yesterday
two of our servers got hanged and we rebooted manually.
>
> the errors which we found in /var/log/messages is as follows . Can some one
> please help me to resolve this issue.
>
> dkernel: drivers/usb/input/hid-core.c: not resubmitting, input1
> kernel: usb 2-1: USB disconnect, address 3
>
> kernel: hdf: drive not ready for command
> kernel: hdf: status error: status=0x7f { DriveReady DeviceFault
> SeekComplete
> DataRequest CorrectedError Index Error }
> kernel: hdf: status error: error=0x7fIllegalLengthIndication EndOfMedia
Aborted Command MediaChangeRequested LastFailedSense 0x07
> kernel: hdf: drive not ready for command
> kernel: hdf: status error: status=0x7f { DriveReady DeviceFault
> SeekComplete
> DataRequest CorrectedError Index Error }
> kernel: hdf: status error: error=0x7fIllegalLengthIndication EndOfMedia
Aborted Command MediaChangeRequested LastFailedSense 0x07
> kernel: hdf: drive not ready for command
> kernel: hdf: status error: status=0x7f { DriveReady DeviceFault
> SeekComplete
> DataRequest CorrectedError Index Error }
> kernel: hdf: status error: error=0x7fIllegalLengthIndication EndOfMedia
Aborted Command MediaChangeRequested LastFailedSense 0x07
> kernel: hdf: drive not ready for command
> kernel: irq 193: nobody cared! (screaming interrupt?)
> kernel: irq 193: Please try booting with acpi=off and report a bug
kernel:  [<c0107532>] __report_bad_irq+0x3a/0x77
> kernel:  [<c01077a9>] note_interrupt+0xea/0x115
> kernel:  [<c0107a55>] do_IRQ+0x143/0x1ae
> kernel:  [<c02d5198>] common_interrupt+0x18/0x20
> kernel:  [<c01040e8>] mwait_idle+0x33/0x42
> kernel:  [<c01040a0>] cpu_idle+0x26/0x3b
> kernel: handlers:
> kernel: [<c0241ad6>] (ide_intr+0x0/0x11e)
> kernel: [<c025a6b4>] (usb_hcd_irq+0x0/0x4b)
> kernel: Disabling IRQ #193
> kernel: usb 2-1: new full speed USB device using address 4
> kernel: input: USB HID v1.10 Keyboard [Dell DRAC4] on usb-0000:00:1d.0-1
kernel: input: USB HID v1.10 Mouse [Dell DRAC4] on usb-0000:00:1d.0-1
syslogd 1.4.1: restart.
> syslog: syslogd startup succeeded
>
>
>
> Regards,
> Madhu.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20070629/ec00897d/attachment-0001.htm
>
> ------------------------------
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>
> End of Linux-PowerEdge Digest, Vol 33, Issue 70
> ***********************************************
>





More information about the Linux-PowerEdge mailing list