Fedora core 4 on 1850 only running at 10MBps

Duncan Hill poweredge at cricalix.net
Mon Jun 25 15:19:10 CDT 2007


On Mon, June 25, 2007 20:39, Marcel White wrote:
> Thanks for the quick responses:
>
>
> Here's the ethtool output for one of the interfaces:
>
>
> Settings for eth0:
> Supported ports: [ TP ]
> Supported link modes:   10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Full
> Supports auto-negotiation: Yes
> Advertised link modes:  10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Full
> Advertised auto-negotiation: Yes
> Speed: 10Mb/s
> Duplex: Full

Is the server on a 10Mbit circuit?  They might have applied bandwidth limits by forcing
the port to 10Mbit instead of doing it at 100 and with a throttler upstream.



More information about the Linux-PowerEdge mailing list