MegaCLI on Debian 64bit with udev

Rudy Gevaert Rudy.Gevaert at UGent.be
Fri Jun 15 01:15:07 CDT 2007


Sam Flory wrote:
> Rudy Gevaert wrote:
>> Hi,
>>
>> I'm trying to use MegaCLI on a Debian etch machine, 64bit.  I made a 
>> debian package with alien from the rpm that contained the MegaCLI 
>> software.  I'm using udev.
>>
>> When running I get this:
>>
>> marmot1:/opt# strace -x -e all -o log  -s 100 ./MegaCli -EncInfo -aAll
>> [ Process PID=5368 runs in 32 bit mode. ]
>>
>> ERROR:Could not detect controller
>>
>> As anybody tried this already?  Got it working?
>>
>> The output of strace is on http://users.ugent.be/~rgevaert/dell/log
>>
> 
> 
>   Uhh what's the hardware in question.  MegaCli only works with a
> certain subset of controllers.  What is in /proc/scsi/scsi?

Host: scsi0 Channel: 00 Id: 00 Lun: 00
   Vendor: DELL     Model: VIRTUAL DISK  IM Rev: 1998
   Type:   Direct-Access                    ANSI  SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
   Vendor: SDR      Model: GEM318P          Rev: 1
   Type:   Processor                        ANSI  SCSI revision: 02
Host: scsi0 Channel: 01 Id: 00 Lun: 00
   Vendor: SEAGATE  Model: ST373207LC       Rev: D703
   Type:   Direct-Access                    ANSI  SCSI revision: 03
Host: scsi0 Channel: 01 Id: 01 Lun: 00
   Vendor: SEAGATE  Model: ST373207LC       Rev: D703
   Type:   Direct-Access                    ANSI  SCSI revision: 03

I'm isueing this on 1955 and 1855.

Thanks in advance,

-- 
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Rudy Gevaert          Rudy.Gevaert at UGent.be          tel:+32 9 264 4734
Directie ICT, afd. Infrastructuur ICT Department, Infrastructure office
Groep Systemen                    Systems group
Universiteit Gent                 Ghent University
Krijgslaan 281, gebouw S9, 9000 Gent, Belgie               www.UGent.be
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --



More information about the Linux-PowerEdge mailing list