2950 RAID tools

Naidu Bollineni naidu at kazeon.com
Fri Jun 8 11:11:07 CDT 2007

Are there some reduced set of command options for megCLI that work for
doing RAID status, and reconfigure? I am confused with so many options
it has.






From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of McDougall,
Marshall (FSH)
Sent: Friday, June 08, 2007 9:06 AM
To: linux-poweredge at dell.com
Subject: RE: 2950 RAID tools


Both megarc and megacli were suggested to me.  megarc could not find any
controllers, but megacli worked just fine.  Thanks, Andy and all who


Regards, Marshall 



	From: Adam Williams [mailto:awilliam at mdah.state.ms.us] 
	Sent: Friday, June 08, 2007 9:47 AM
	To: McDougall, Marshall (FSH)
	Cc: linux-poweredge at dell.com
	Subject: Re: 2950 RAID tools

	megacli from lsi.com
	McDougall, Marshall (FSH) wrote: 

	I have some 2950's with PERC 5i's in them.  I am encountering
some very inconsistent performance between them, specifically with
regards to database write operations.  The write performance is actually
worse than my 2550's!  I would like to have a look at how the raid
arrays are setup, but I don't want to take them down to do it.  With the
2550's I have I used afacli.  Is there a similar tool for the new
PERC's?  Thanks.

	Regards, Marshall 


	Linux-PowerEdge mailing list
	Linux-PowerEdge at dell.com
	Please read the FAQ at http://lists.us.dell.com/faq


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20070608/ed6af2fe/attachment.htm 

More information about the Linux-PowerEdge mailing list