2950 RAID tools

[McDougall, Marshall (FSH)]

Both megarc and megacli were suggested to me.  megarc could not find any
controllers, but megacli worked just fine.  Thanks, Andy and all who
responded.
 
Regards, Marshall 


________________________________

	From: Adam Williams [mailto:awilliam at mdah.state.ms.us] 
	Sent: Friday, June 08, 2007 9:47 AM
	To: McDougall, Marshall (FSH)
	Cc: linux-poweredge at dell.com
	Subject: Re: 2950 RAID tools
	
	
	megacli from lsi.com
	
	McDougall, Marshall (FSH) wrote: 

		I have some 2950's with PERC 5i's in them.  I am
encountering some very inconsistent performance between them,
specifically with regards to database write operations.  The write
performance is actually worse than my 2550's!  I would like to have a
look at how the raid arrays are setup, but I don't want to take them
down to do it.  With the 2550's I have I used afacli.  Is there a
similar tool for the new PERC's?  Thanks.

		Regards, Marshall 

		
________________________________


		_______________________________________________
		Linux-PowerEdge mailing list
		Linux-PowerEdge at dell.com
	
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
		Please read the FAQ at http://lists.us.dell.com/faq


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20070608/a658325b/attachment-0001.htm