dell 1950 / dell powerconnect 6248 and VLANs

[Arjen]

Vanush Paturyan wrote:
> 
> On 6 Jun 2007, at 14:52, Arjen wrote:
> 
>> Vanush Paturyan wrote:
>>
>>> I am not familiar with Dell PowerConnect switch, but on a Cisco  
>>> switches the interface on the switch should be configured as trunk  
>>> (i.e. carry all VLANs over it, tagging packets appropriately.
>>
>> So, if I understand correctly, the port on the switch that connects 
>> the Linux machine with the VLAN interface should be in trunking mode, 
>> and the other VLAN member ports should be configured for access with 
>> the correct VLAN ID?
> 
> Yes, that is correct configuration.

Vanush, thanks a lot, it WORKS!

On to the next.

Arjen.