dell 1950 / dell powerconnect 6248 and VLANs

[Vanush Paturyan]

On 6 Jun 2007, at 14:52, Arjen wrote:

> Vanush Paturyan wrote:
>
>> I am not familiar with Dell PowerConnect switch, but on a Cisco   
>> switches the interface on the switch should be configured as  
>> trunk  (i.e. carry all VLANs over it, tagging packets appropriately.
>
> So, if I understand correctly, the port on the switch that connects  
> the Linux machine with the VLAN interface should be in trunking  
> mode, and the other VLAN member ports should be configured for  
> access with the correct VLAN ID?

Yes, that is correct configuration.

Cheers,
Misha.

> Regards,
> Arjen.
>
>