OMSA 5.2 on CentOS 4.5 (final) doesn't show all info

Erik Cummings ecummings at PathworksSoftware.com
Mon Jun 4 10:42:00 CDT 2007


Ummmm....can anyone say "duh".  The ipmi service was not running...thanks Vincent!

Problem for me occurred because we are moving from Debian to CentOS.  

Erik



> -----Original Message-----
> From: Vincent Janelle [mailto:Vincent.Janelle at active.com]
> Sent: Sunday, June 03, 2007 2:07 AM
> To: Erik Cummings
> Cc: Linux-PowerEdge at dell.com
> Subject: RE: OMSA 5.2 on CentOS 4.5 (final) doesn't show all info
> 
> /etc/init.d/ipmi start?
> 
> -----Original Message-----
> From: linux-poweredge-bounces at dell.com
> [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Erik Cummings
> Sent: Sunday, June 03, 2007 12:28 AM
> To: Michael E Brown
> Cc: Linux-PowerEdge at dell.com
> Subject: RE: OMSA 5.2 on CentOS 4.5 (final) doesn't show all info
> 
> I was using the service dsm_  start ...
> 
> So, still appear to be in the same state - but I'm getting this
> response...
> [root at joy log]# srvadmin-services.sh start
> Starting mptctl:
> Waiting for mptctl driver registration to complete:
> [  OK  ]
> 
> Starting Systems Management Device Drivers:
> Starting dell_rbu: Already started[  OK  ]
> Starting ipmi driver: [FAILED]
> Starting Systems Management Device Drivers:
> Starting dell_rbu: Already started[  OK  ]
> Starting ipmi driver: [FAILED]
> Starting DSM SA Shared Services: [  OK  ]
> 
> Starting DSM SA Connection Service: [  OK  ]
> 
> [root at joy log]# srvadmin-services.sh status
> dell_rbu (module) is stopped
> ipmi driver is stopped
> dsm_sa_datamgr32d is stopped
> dsm_sa_eventmgr32d is stopped
> dsm_sa_snmp32d is stopped
> dsm_om_shrsvc32d (pid 19016) is running
> dsm_om_connsvc32d (pid 19086 19085) is running
> [root at joy log]#
> 
> Seems like a problem with IPMI driver???
> 
> Nothing in logs that seems to refer or reflect this.
> 
> Is there a debug/verbose switch?
> 
> Erik
> 
> 
> > -----Original Message-----
> > From: Michael E Brown [mailto:Michael_E_Brown at dell.com]
> > Sent: Friday, June 01, 2007 9:26 PM
> > To: Erik Cummings
> > Cc: Linux-PowerEdge at dell.com
> > Subject: Re: OMSA 5.2 on CentOS 4.5 (final) doesn't show all info
> >
> > On Fri, Jun 01, 2007 at 05:17:44PM -0700, Erik Cummings wrote:
> > > I searched a bit in the archives - but I do admit not exhaustively -
> so
> > if this one is already answered - just give me the right search terms
> > please...
> > >
> > > Installed OMSA via yum repo onto CentOS 4.5
> >
> > Cool.
> >
> > >
> > > Status and info is just NOT appearing/available via cli or web.  As
> you
> > can see below by the output of omreport system summary.  These are
> 1955
> > Blades.
> >
> > Not so cool.
> >
> > Have you tried to see if running "srvadmin-services.sh start" cures
> it?
> > --
> > Michael
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
> 



More information about the Linux-PowerEdge mailing list