MD1000 and PERC5/E I/O bottleneck
eyablon at tripadvisor.com
Mon Jun 4 07:31:51 CDT 2007
full MD1000 w/ 15K RPM SAS HDDs.
On Jun 4, 2007, at 12:22 AM, Vincent Janelle wrote:
> Are these sata disks, or sas?
> -----Original Message-----
> From: linux-poweredge-bounces at dell.com
> [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Eric
> Sent: Sunday, June 03, 2007 6:37 PM
> To: Peter Verhoeven
> Cc: linux-poweredge at dell.com
> Subject: Re: MD1000 and PERC5/E I/O bottleneck
> RAID-1 (inherently 2 disks) offers much less write throughput than a
> 7 disk RAID-5 on the PERC-5 in my tests. RAID-10 on 6 disks was
> closer, but still (somewhat surprisingly) slower than RAID-5 on 7
> On Jun 3, 2007, at 9:21 PM, Peter Verhoeven wrote:
>> Can you afford to go with RAID-1 instead of RAID 5?
>> -----Original Message-----
>> From: linux-poweredge-bounces at dell.com
>> [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Eric
>> Sent: Saturday, 2 June 2007 9:03 AM
>> To: linux-poweredge at dell.com
>> Subject: MD1000 and PERC5/E I/O bottleneck
>> So these results imply that there is a bottleneck somewhere that is
>> preventing me from getting anywhere near what my 14 spindles can
>> Any thoughts on what this bottleneck might be?
More information about the Linux-PowerEdge