OSMA 5.2 on Gentoo 64-bit - Warmer but getting crashes or no data

[Berend Dekens]

Thanks for the suggestion :-)

I ran 'omreport system alertlog' and the strace ends in a load of 
errors... This is a snippet from the turning point:
uname({sys="Linux", node="bartje.xxxxxx.nl", ...}) = 0
open("/opt/dell/srvadmin/omsa/log/dcsys32.xml", O_RDONLY) = -1 ENOENT 
(No such file or directory)
open("/opt/dell/srvadmin/shared/.ipc/.dcsupmtx0E55BA4528406E191AFCE0358E720701", 
O_RDWR|O_CREAT, 0660) = -1 ENOENT (No such
file or directory)
open("/dev/tty", O_RDWR|O_NONBLOCK|O_NOCTTY) = 4
writev(4, [{umovestr: Input/output error
0x17ecf15cf8, 47110761002}, {umovestr: Input/output error
0x2ecf15d11, 145709161828}, {umovestr: Input/output error
0x4ecf15d15, 38520824528}, {ptrace: umoven: Input/output error

The xml file does not exist and the shared folder in the other call is 
not there either... That might be the cause of the problem but I don't 
have clue where the files of folder should come from... So is this a 
problem generated by my manual installation skills or is something else 
going haywire?...

Regards,
Berend Dekens

Khare, Rahul (GE Infra, Water, non-ge) wrote:
> Try to run the strace command followed by the actual command:-
>
> For e.g. 
>
> # strace ls -lrt
>
> This would not run the actual command but would let you know of all the execution steps being followed in the command.
>
> # strace omreport
>
> Hope it helps!!
>
> Rahul Khare.
>   
-------------- next part --------------
A non-text attachment was scrubbed...
Name: berend.vcf
Type: text/x-vcard
Size: 323 bytes
Desc: not available
Url : http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20070730/68faf934/attachment.bin