BMC issues with Poweredge 1950

[Ram, Prashanth]

Hi..
            No luck, I'm still getting the same error message. I even
tried to power cycle to bmc via the mc command, to no avail.
 
Thanks!
 
 
== peerbmc node ==
[root at chojp ~]# ipmitool user list 1
ID  Name             Callin  Link Auth  IPMI Msg   Channel Priv Limit
1                    true    true       true       ADMINISTRATOR
2   root             true    true       true       ADMINISTRATOR
[root at chojp ~]# ipmitool user list 2
ID  Name             Callin  Link Auth  IPMI Msg   Channel Priv Limit
1                    true    true       true       NO ACCESS
2   root             true    true       true       ADMINISTRATOR
 
==  good node ==
ipmitool user list 1
ID  Name             Callin  Link Auth  IPMI Msg   Channel Priv Limit
1                    true    true       true       ADMINISTRATOR
2   root             true    true       true       ADMINISTRATOR
[root at chojs ~]# ipmitool user list 2
ID  Name             Callin  Link Auth  IPMI Msg   Channel Priv Limit
1                    true    true       true       NO ACCESS
2   root             true    true       true       ADMINISTRATOR 
________________________________

From: Krishnaprasad_K at Dell.com [mailto:Krishnaprasad_K at Dell.com] 
Sent: Friday, July 27, 2007 3:12 AM
To: Ram, Prashanth; linux-poweredge at lists.us.dell.com
Subject: RE: BMC issues with Poweredge 1950
 
Hi,
 
You may have to enable lan access for getting BMC values from a remote
machine. You can do the same using BMC bios or utilities like ipmitool .
Have a look into the link below
 
Using ipmitool u can enable lan access by the following command
 
/usr/bin/ipmitool -I open lan set 1 access on
 
Have a look into the link below for configuring BMC using ipmitool
 
http://lonesysadmin.net/2005/09/23/configuring-and-securing-ipmi-on-dell
-poweredge-x8xx-hardware/
 
 
Hope this helps !
 
Thanks, 
Krishnaprasad 
 
 
Thanks, 
Krishnaprasad 
 
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Ram, Prashanth
Sent: Friday, July 27, 2007 8:44 AM
To: linux-poweredge-Lists
Subject: BMC issues with Poweredge 1950
 
Hi,
 
            We have a BMC that won't respond to commands sent to it via
the network, but will respond to local inquiries. I've tried the basics,
(reset BMC, update FW/BIOS, check username/password for BMC), but still
no luck!  Does anyone have any ideas how to debug this problem?
 
Thanks!
 
== from node 1 to peerbmc node ==
$ipmitool -P rootuser -H peerbmc bmc info -v
Get Auth Capabilities command failed
Get Auth Capabilities command failed
Error: Unable to establish LAN session
ipmi_lan_send_cmd failed to open intf
Get Device ID command failed
 
 
== peerbmc node ==
$ipmitool  ipmitool bmc info
Device ID                 : 32
Device Revision           : 0
Firmware Revision         : 1.33
IPMI Version              : 2.0
Manufacturer ID           : 674
Manufacturer Name         : Unknown (0x2a2)
Product ID                : 256 (0x0100)
Device Available          : yes
Provides Device SDRs      : yes
Additional Device Support :
    Sensor Device
    SDR Repository Device
    SEL Device
    FRU Inventory Device
    IPMB Event Receiver
    Bridge
    Chassis Device
Aux Firmware Rev Info     :
    0x00
    0x00
    0x00
    0x00
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20070727/39777610/attachment-0001.htm