BMC issues with Poweredge 1950

[Ram, Prashanth]

Hi,
 
            We have a BMC that won't respond to commands sent to it via
the network, but will respond to local inquiries. I've tried the basics,
(reset BMC, update FW/BIOS, check username/password for BMC), but still
no luck!  Does anyone have any ideas how to debug this problem?
 
Thanks!
 
== from node 1 to peerbmc node ==
$ipmitool -P rootuser -H peerbmc bmc info -v
Get Auth Capabilities command failed
Get Auth Capabilities command failed
Error: Unable to establish LAN session
ipmi_lan_send_cmd failed to open intf
Get Device ID command failed
 
 
== peerbmc node ==
$ipmitool  ipmitool bmc info
Device ID                 : 32
Device Revision           : 0
Firmware Revision         : 1.33
IPMI Version              : 2.0
Manufacturer ID           : 674
Manufacturer Name         : Unknown (0x2a2)
Product ID                : 256 (0x0100)
Device Available          : yes
Provides Device SDRs      : yes
Additional Device Support :
    Sensor Device
    SDR Repository Device
    SEL Device
    FRU Inventory Device
    IPMB Event Receiver
    Bridge
    Chassis Device
Aux Firmware Rev Info     :
    0x00
    0x00
    0x00
    0x00
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20070726/81150403/attachment.htm