orange flashing drive light on PE6800

[Carlos Antunes]

Patrick,

For those of us using afacli, is "Check Consistency" the same as 
"container scrub"?

Thanks!

Carlos

Patrick_Boyd at dell.com wrote:
> Depending on how the light is flashing this may be a SMART alert. If you
> have OMSA on the system it will indicate a predicted failure on the
> drive in question. 
>
> The recommended procedure to fix this is:
> 1) Order replacement drive
> 2) Perform a Check Consistency on the VD in which this drive is a member
> 3) Once the Check has finished, Offline the drive
> 4) Remove the drive
> 5) Replace the drive
> 6) Rebuild should occur automatically, however if it does not:
> 	6a) Assign the new drive as a hotspare to the degraded VD.
>
>
> Patrick Boyd
> Dell Storage Software Engineer
> (512)728-3182
>
>
>
> -----Original Message-----
> From: linux-poweredge-bounces at dell.com
> [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Adam Williams
> Sent: Thursday, July 26, 2007 7:50 AM
> To: linux-poweredge-Lists
> Subject: orange flashing drive light on PE6800
>
> I came in this morning and my PE6800 w/ PERC4/DC has drive #5 with the 
> orange light flashing under the heartbeat icon on the drive tray.  
> Rebooted it, and the PERC4/DC did not say it had either of the logical 
> drives degraded.  So what does this indicate?
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>